Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
-
Re: Problem Recording WAV Files with Flex 6600M
Al, you didn't say if you are seeing the audio waveform in Audacity as you are recording. You should clearly see the waveform as it records, and it should be nearly full scale on the graph. I wo…1 -
Re: Need help! Configuration with Logger32 in RTTY Split Mode
I just want to reinforce what Tom N5MOA has posted above: This problem of not being able to work split in RTTY is caused by "Auto Switch TX Slice" being turned on for the COM port in SmartS…1 -
Re: Flex 6400M and Ametritron ALS-600
You can also use profiles to set the power level, as SmartSDR profiles remember power output per band. On my KPA1500, I have Transmit profiles for 1500 W, 700 W and "Barefoot", which disabl…1 -
Re: WSJT-X 1.9 Power drops off past 2500 Hz
You need to move your transmit bandwidth up to about 3.0 kHz upper cut-off, and probably 100 Hz on the low frequency side.1 -
Re: rtty low tones
First, the Flex 6000-series radios are the best RTTY radios I have ever used. Put the Flex into RTTY mode and in MMTTY, or whatever you are using as your TU program, set Mark to 2125 Hz and the shift…1
