Conversations
Conversations 1 - 20 of 166
I would like to see the RF Power meter do peak & average like the mike level meters does. That is really neat.
I have also suggested ...
Squelch
What would it sound like if I could grab the bottom of the receiver slice and drag it above the noise floor?
Option to Automate the AGC-T setting
Background The AGC-T setting needs to be adjusted differently based on the band and current conditions that affect the noise floor. We ...
Retain sorting order in memory channels
I would like the Settings>Memory Channels page to retain the prior sorting selections when smartSDR is started. I like to sort by group,...
FRS should add feature to Flex6700 to Noise Nulling ability like the ANAN Radio's see HPSDR Phase Noise Cancellation (+NB): ANAN-100D
FRS should add feature to Flex6700 to Noise Nulling ability like the ANAN Radio's see HPSDR Phase Noise Cancellation (+NB): ANAN-100D s...
Screensaver
Fonction for screensaver for the Maestro and the new 6400M and 6600M
Any prospect of a mid-size linear amp from Flex?
The new Powergenius linear from Flex is certainly impressive, but it is more linear than I really need. Is there any prospect in the nex...
Feature Request - SmartLink guest login and radio controls and/or info
Now that SmartLink is out, most of us are playing with it and quite frankly I'm anxious to share and share alike with other Flex owners. ...
Voltage, temp and current
Will smart sdr show voltage and current and temp at sometime in the future. Also will we have the test features of power sdr ?
Suggestion for CW Bandwidth buttons
Make the 6 cw bandwidth buttons right-click programmable. As a CW-only op, I have no need for 1.5 or 3.0 width. It would be nice to pro...
Tune & SWR Meter
When I hit TUNE on my older rigs, the meter will automatically toggle over to the SWR meter for obvious reasons. So far I haven't been a...
desired features
I would like to see pre-adaptive distortion as I'm sure would others. Also, a way to turn off the waterfall display on the M models.
Right and left audio level diversity mode
When using SmartSDR, you can adjust the r/l audio levels independently when in diversity mode. When using the front panel on the 6600M (a...
CW on SSB modes
With the recent sporadic E openings on 6 meters, I find I
miss a feature I had on my K3 which is the ability to transmit CW while in USB...
maestro with smart sdr
It would be nice to have an option where the knobs and buttons on the Maestro could be used with SmartSDR running on a PC.
NEED DAX with SmartLink !
I have been using the new FT8 mode remotely on my LAN. I really want DAX to work on WAN connections too. I hope that the router ports wil...
Setting up a Remote Operation operator list with restrictions
Clubs and leasing operations need a sign on process that can set operation parameters depending on the operator's license conditions. My ...
I'd like a CI-V or similar interface for the FLEX-6000
I presently use an ICOM-7600 in conjunction with a CI-V interface. This tracks the frequency, timestamp, ETC which I utilize for my logg...
"XVTR" setup for Frequency dividing Class D amplifiers on VLF
I have seen several posts from users trying to figure out how to drive an amplifier for 630 Meters and 2200 Meters. Several amp options ...
Idea for future consideration
When using XIT for split operation with my 6300 and SSDR 2, it would be nice to be able to adjust the TX frequency by moving the black li...