Conversations
Recent Conversations
Conversations 141 - 160 of 17310
New laptop, attempting to install/setup SSDR for Windows. Radio is a 6300 with firmware at 2.5.1, 2.5.1 client software works on old lap...
Recording audio for CQWW contest
I'm running a Flex-6400 with SSDR 2.4.9 in the CQWW CW contest. The rules require a continuous audio recording of both RX and TX audio fo...
Help with going fiber optic
In a previous post of mine, someone had offered to assist me in connecting my PC and Flex 6500 via fiber-optic to my router. Of course, n...
What type of Amp are you using??
I'm doing a poll on HF Amps I would like to know which HF amp you are using and if it is CAT controlled. Let me know! 73, Mike va3mw
"page_fault_in_nonpaged_area" error after installing SmartSDR
Hi,Setting up a new PC running windows 10 Pro and I have a "Blue screen" Stopcode causing the PC to reboot.The code is "PAGE_FAULT_IN_NON...
2 Radios separate networks one SmartLink Account
Hi folks, we are two operators in different state. Each one runs a FLEX 6300 with V3. We now want to use our system cross wise. I figured...
Using PC and 6400, no Maesro. Can't hear my sidetone.
All volume controls up, Sidetone button on (blue), but can't hear my CW sidetone thru the PC. Probably something obvious, but don't know...
PG XL and Tuner Genius News from 4O3A Forum
Hello Ak4ZJR,
2nd production run of Power Genius
XL is expected to appear in FlexRadio in May 2018.
We expect to ship Tuner Geniu...
FLEX 6300 6500 6700 fan availability
I've had a number of inquiries again recently regarding fan availability. I am planning another bulk purchase. In order to gauge intere...
Maestro CW Bug 7378 Not Fixed?
Looking through the changelog of SmartSDR 3.0.27 it appears that bug #7378 was not fixed. Is this so?This bug was that CW from the Maest...
Connecting an ALS-600 to a Flex 6000 series radio to Band Switch automatically.
If anyone is using an ALS-600 Amplifier and trying to connect it to 6000 series radio using the new USB cables, I have the answer. I pur...
NEW SUPPLIED POWER CABLE LENGTH QUESTION
How long is the PowerPole terminated DC power cable that ships with the Flex 6400 transceiver?
wsjtx will not receive
I have used WSJTx for at least a year with success......but now it won't receive, DIGIU...DAX Channels in SmarSDR (2.6.1) are set up corr...
PSDR V2.8.0134 and Windows 10 with FLEX 1500 with always short dropouts
Flex 1500 with dropouts at RX and TX.PSDR V 2.8 and Windows 10During operation I have short interruptions at RX and TX. During operation,...
Maestro Update to 3.1.8 from 3.0.27 fails
I am trying to update my Maestro, but it will not update. It is at 3.0.27, but times out trying to update to 3.1.8. Any thoughts on how ...
Anyone able to run CWSkimmer while connected via SmartLink?
I've been able to run CWSkimmer using SDR Bridge or Slicemaster when operating locally. I am unable to run CWSkimmer when working remote ...
PTT (MOX) Release when PA temp. reaches 44-47 DegressC
Operating my Flex-6600 on 80 m SSB (90W) the PA temperature start to increase and when reaching 44-47 degress C the PTT(MOX) releases. A...
On the iOS app, does "voice over" work?
I have a blind ham radio friend who was wondering if he could use "Voice Over" feature on the iPhone to control/describe what's boing on ...
Slice Master 6000 v0.10.7 is now available
Version v0.10.7 adds basic Flex SSDR v3 support to Slice Master. The latest README is now available at https://github.com/K1DBO/slice-...
auto mode by frequency
Can anyone tell me if the Flex 6400M has auto mode capability like the Kenwoods do? (automatically goes to the correct mode depending on ...