Conversations
Conversations 81 - 100 of 3049
had multiple (25+?) crashes this weekend on my new Flex 6600 during the RTTY WPX contest. Running ver 2.4.9 with a Maestro and N1MM+, set...
Receiver feedback during Tx (Not RF into the speakers)
Last night, while on 20mtrs SSB, my 6700 got into a weird mode. When I keyed the Tx, I got a really bad feedback condition. Almost as if ...
Flex 6500 GPSDO won't ock
I have a Flex 6500 with the GPSDO installed. It was working just fine with solid lock until last weekend when I powered it down for some ...
Transmitter RF getting into ethernet
I had a problem in the past using an antenna that resulted in enough CM to interrupt the ethernet communications with the Flex. I did two...
VOX operation on 6500 with HM-PRO
I am trying to use the VOX operation on the 6500 with SSDR 1.2.1. It will not trigger transmit at all but when I, inadvertantly, leave th...
Audio break up, (stutters) and the signal display stutters v1.4 & 1.43 Remote
I previously posted about this under another subject, thinking that it
was related to the freezing problem some others were having - "S...
FLEX-6500 doesn't work after updating to the version 1.6.17
FLEX-6500 doesn't work after updating to the version 1.6.17. After start of the program in the left window there is no connection with r...
W10 1803 Update 4/30/18
A bit of a problem, but not unexpected. Here's what I did: Uninstalled two previous versions of SSDR, .30 and .32 (using IOBit Unins...
New Maestro loading error 152
New out the box Maestro on the same network and or directly connected to Flex 6600 gives me loading error 152 communication problem with ...
Stuck in update mode
Tried to update my 6600M to 2.4.9 and it never completed the display just showed the 2 s meters and the power button was solid purple. We...
Spot display causes radio to stutter
I'm running Maestro with a 6500, with the Maestro, 6500 and PC connected via an ethernet switch and ethernet cables. Software at 2.4.9 o...
Transmit RF power at 100 on startup?
After changing to V2.1.30 the RF setting is always at 100W on startup and is not saving were I leave it? If I toggle to another profile t...
Nagging Audio Issue
This happens quite often though I just started collecting some evidence on it. First off, I don't turn off my radio. It basically runs 24...
Low Frequency Audio Noise
I recently built a cable so that I could use my Flex-6700 on the digital modes. I used the Tigertronics SignalLink USB sound card which n...
Lost My DAX
Lost My DAX. Tried to Use VoiceKeyer today on the contest. and no DAX. Show control Panal and Dax 1 Selected Xmit and receive. but no d...
40M SWR too high
My ATU tunes every band except 40m. My IC-706 reports 1:1 on 40 with no tuner, but transmitting with the flex reports a high SWR with eit...
10 Meter Spurs
I have noted some rather significant spurs across the 10 meter band (approximately 10 dB above the noise floor and spaced about 5 KHz apa...
Flex 5000a Constantly Freezes!
I have a Flex 5000a that I have used for the past couple of years, but lately, it freezes constantly! Seems to be a firewire issue, and ...
6700 power output
My 6700 only puts out 79watts on 15m (21.100) and only 70watts on 20m (14.090). I am using a 40amp supply which shows 14.00 volts both on...
dropped packets when client connected from same machine
Flex 6300 SmartSDR 1.5.1 Running SmartSDR from a laptop directly wired (or through a GigE switch) I see Network quality is good and ping...