YAESU FUSION WIRES-X install issues

  • 3
  • Question
  • Updated 4 months ago

Tried to install a YAESU FUSION WIRES-X box on a Windows PC. Could not get the software to see the audio from the wires box.

WE JUST fixed it. Deinstalled the FLEX SDR software and FLEX DAX software and drivers, and FUSION/wires-x box works fine.

 No warnings on startup of the WIRES program and audio in and out of the conf rooms.

We tried everything. Did not think it was the FLEX/DAX drivers because they were not being used.




Photo of Kent Hufford

Kent Hufford

  • 50 Posts
  • 5 Reply Likes

Posted 5 years ago

  • 3
Photo of Stu Phillips - K6TU

Stu Phillips - K6TU, Elmer

  • 642 Posts
  • 257 Reply Likes
My guess is that the Yaesu software can't deal with the number of audio devices enumerated by Windows when DAX is installed.

Yet another example of software written around a set of expectations that aren't always valid (like only a small number of audio devices in a system).  Lots of the digital mode software packages have the same problem.

GL trying to get Yaesu to fix this or even find a way to post a bug report to them.

Sorry but I think you are stuck.  It's a Yaesu problem, not a FlexRadio problem.

Stu K6TU
Photo of Daniel Drolc

Daniel Drolc

  • 16 Posts
  • 0 Reply Likes
I have sem problems with wire x and dax


  • 93 Posts
  • 22 Reply Likes
Yes. The only way to make it work. Put wires-x on a different Windows Pc than a Flex.
Photo of Daniel Drolc

Daniel Drolc

  • 16 Posts
  • 0 Reply Likes
I wonder if second sound card will fix this problem
Photo of Cal Spreitzer

Cal Spreitzer

  • 455 Posts
  • 116 Reply Likes
Hi Kent,

I just put a Wires-X Box online today as well and had the same issue!  I finally got it working once I uninstalled the FLEX SSDR software.   They do not want to co-exist on the same Windows machine.