X/RIT works but how do you revert back to tuning with the FlexControl? Mine stays in XIT or RIT mode.

  • 1
  • Question
  • Updated 4 years ago
Photo of Craig K9CT

Craig K9CT

  • 37 Posts
  • 45 Reply Likes

Posted 5 years ago

  • 1
Photo of Dave - WB5NHL

Dave - WB5NHL

  • 266 Posts
  • 60 Reply Likes
See http://community.flexradio.com/flexradio/topics/flexcontrol_lock

Basically double click button to restore or push control knob
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 3875 Posts
  • 1180 Reply Likes
If you single-click AUX 1 it turns RIT on. and the big knob tunes the RIT.
If you double-click AUX1 it turns RIT off. and the big knob tunes the slice.
The Light by the AUX 1 button will toggle with the status of RIT

The same for AUX 3 and XIT...

Hope this helps.
Photo of Greg

Greg

  • 656 Posts
  • 63 Reply Likes
Now that RIT/XIT are working, does anyone know if there is a CAT command for CLEARRIT? This is a great function when contesting.

Thanks
Greg
Photo of Bob G   W1GLV

Bob G W1GLV

  • 639 Posts
  • 107 Reply Likes
once you have tuned Xor RIT, just press down on the tuning knob. That takes it out of X/RIT and back to tuning the freq. but leaves the X/RIT setting in tack.
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 3875 Posts
  • 1180 Reply Likes
Thanks, Bob, I missed that feature. I tried the knob push when RIT was off and assumed that it didn't do anything! Not it is even more helpful!
Photo of Craig K9CT

Craig K9CT

  • 37 Posts
  • 45 Reply Likes
Guys...thanks for the info. I looked all over for an explanation before posting. Your answers are appreciated. I am a new owner of a Flex 6700 and new to FlexRadio gear.

73, Craig K9CT