How to setup WSJT-X With Flex-6700 and DDUtil

  • 1
  • Question
  • Updated 6 years ago
  • (Edited)
After a bit of a struggle to get DAX operational with my XP, SP3 PC, (thanks, Tim!) it was time for some digital modes. FLDigi was a snap; time for something more challenging.

This image shows the configuration parameters for WSJT-X v1.2.1 r3590 freshly downloaded from K1JT's web site. The CAT port is from the 6 - 16 pair from DDUTIL Ver 3. Note that the CAT box is checked. The RX1 and TX1 ports from the XP System are also shown.

The second image shows what SmartSDRCAT is currently using while WSJT-X is running. CAT from the Flex-6700 is on Port 4.

This third image shows the entire screen while in the middle of a JT-9 QSO. The top two windows show the WSJT-X screens. Don't forget to widen both the transmit and the receive bandwidths to about 4KHz

Good luck and good DX!

Rich - K3SOM
Photo of Rich K3SOM

Rich K3SOM

  • 17 Posts
  • 3 Reply Likes

Posted 6 years ago

  • 1

Be the first to post a reply!