WSJT-X Dogpark

  • 1
  • Question
  • Updated 12 months ago
I'm trying to get WSJT-X running on my Mac with DogPark, XDAX and XCAT.

DogPark is communicating FB with XDAX and XCAT. But WSJT-X is not conntecting to the radio. I've tried the Flex 6xxx driver in WSJT-X, as well as the Kenwood fallback driver. 

Just to make things a bit more complicated than they already are, WSJT-X is in an evaluation form. I'm going to give feedback to the writer, but want to check to see if I'm doing anything dumb first. 

Anyone familiar with this setup?
Photo of Michael Coslo

Michael Coslo

  • 947 Posts
  • 259 Reply Likes
  • happy happy

Posted 12 months ago

  • 1
Photo of George Molnar, KF2T

George Molnar, KF2T, Elmer

  • 1680 Posts
  • 616 Reply Likes
Hi Michael,

Hope these shots help...


Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 982 Posts
  • 181 Reply Likes
Use WSJT-X 1.9.1-Darwin.dmg, not 2.0 RC5
(Edited)
Photo of George Molnar, KF2T

George Molnar, KF2T, Elmer

  • 1680 Posts
  • 616 Reply Likes
In this case, there is no difference. Connecting to the radio is the same for both 1.9 and 2.0. I use both, assigning 1.9.1 to one slice and 2.0rc5 to another. Works very well.
Photo of Michael Coslo

Michael Coslo

  • 947 Posts
  • 259 Reply Likes
Worked perfectly, George - my mistake was not having the localhost:5002 in the Network server. Thanks a million!
Photo of Michael Coslo

Michael Coslo

  • 947 Posts
  • 259 Reply Likes
Thanks George, I'm trying it now!