WSJT

  • 1
  • Problem
  • Updated 8 months ago
I am trying to set up WSJT ( the old version not WSJT -X ) so I can use JT65b on EME,
I cannot  find the correct comport setting to key the 6700.  The receive  audio works ok.
Is anyone using WSJT and if so how did you set up the comport? as WSJT does not seem to want to see any of my comports.
WSJT-X works ok, that wan't a problem.
Thanks
Ross
ZL1WN
Photo of Ross Biggar

Ross Biggar

  • 16 Posts
  • 0 Reply Likes

Posted 8 months ago

  • 1
Photo of Rich McCabe

Rich McCabe

  • 1039 Posts
  • 221 Reply Likes
So you have a PTT port setup in CAT and WSJT can not see that port?
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1199 Posts
  • 245 Reply Likes
Create a PTT port in SmartSDR CAT. Set WSJT to the client port number that was created. Select RTS.

Dave wo2x

Photo of Ross Biggar

Ross Biggar

  • 16 Posts
  • 0 Reply Likes
David,
Thanks for the reply. but how did you get edit to show 2 comports eg com 10 and com 110. When I try to edit a port it just shows client com and VFO slice.?

Regards
Ross
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1199 Posts
  • 245 Reply Likes
In the pop up that shows the client port if you right click in an empty area you can choose advanced.

Port 110 in my case talks to the radio and there is no need to change it.

Dave
Photo of Ross Biggar

Ross Biggar

  • 16 Posts
  • 0 Reply Likes
Thanks David,
Clicking on an empty space is on thing I did not think of.
That works well.
Now to get the rest of my EME system going.

(And also to solve why my Maestro has a circular login, it goes round and round wanting a login, even on the latest  sdr version.)
Photo of Marc Lalonde

Marc Lalonde

  • 356 Posts
  • 87 Reply Likes
my personal testing show that even on EME difference in WSJT-X and WSJT-10  is minimal ,difference start to show whit -25 to -27 signal 

not to mantion that WSJT-X is much more flex/user friendly ;-)