Wrong mode in logbook

  • 1
  • Question
  • Updated 2 years ago
  • Answered
HI All

Using Log4OM when I am on RTTY it does not log as RTTY it stays at the last mode I used, So if I switch my Flex from SSB to RTTY the logbook will still think its in SSB,

I can toggle through all modes SSB/CW/FM/AM ect and log4om will follow but when I select RTTY it does not move to it,

I have the latest Omnirig files on my PC

Anyone have any ideas

Thanks
Trevor
EI2GLB
Photo of Trevor-EI2GLB

Trevor-EI2GLB

  • 54 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9148 Posts
  • 3467 Reply Likes
Make sure you have the latest smartSDR.ini file for OmniRig.
Photo of Trevor-EI2GLB

Trevor-EI2GLB

  • 54 Posts
  • 0 Reply Likes
Hi TIm
Yes I updated both Log4om and Omnirig today to the latest versions,

Thanks
Trevor
Photo of Jay Spaulding

Jay Spaulding

  • 65 Posts
  • 3 Reply Likes
What are you using for a decoder and also you are doing RTTY on USB on most programs..
So its not log in them wrong/ If you are using FLDigi and have it setup so when you log it goes over to Log40M automatically it will correct the problem.  
Photo of Bob Kozlarek

Bob Kozlarek

  • 10 Posts
  • 0 Reply Likes
Wo2x had this same issue he contacted the support team for log4om who I believe was already aware of the problem. It should be corrected in version 2 of the Locking program. Hopefully Dave will see this message and respond.
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes

Omnirig does NOT support true RTTY mode. One of the drawbacks of Log4OM until their 2.0 comes out (if/when). I've contacted the author of OmniRig and even with a modified ini it still will not support true native RTTY from the Flex. (mode 30 I believe)

Ham Radio Deluxe seems to be on recovery mode from their ownership blowup and the 6.4 version which is being released this week works quite well (finally).


Thanks all I have for now :-)

Dave wo2x