wireless Headset from KT9D Nice

  • 1
  • Praise
  • Updated 2 years ago
KT9D jabr Headset works super with my Flex 6500 and got many great audio reports. it's Plug & Play , must be used in VOX  but it's works great. I have a profile with Heil 781 and now a new profile with the JABR headset.  
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 310 Posts
  • 32 Reply Likes

Posted 2 years ago

  • 1
Photo of KF4HR

KF4HR

  • 545 Posts
  • 158 Reply Likes
I assume the wireless transmitter is plugged into the back of your Flex 6500?  Can you manually operate it via manually PTT (MOX)?  A photo would be interesting.
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 310 Posts
  • 32 Reply Likes

it's powered by a wall wart. KT9D will make the cable for your Flex radio. I just tested the range and walk out side dam it was cold at 70 feet the audio broke up a little, it plugs in the 8 pin connector in the front of the radio and my Heil 781 plugs in the balanced connector in the back of the radio. But inside my home perfect at any range inside my home it's great. YOU must use VOX with this headset.


Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 310 Posts
  • 32 Reply Likes
Photo of Duane, AC5AA

Duane, AC5AA

  • 400 Posts
  • 86 Reply Likes
I'd guess if you're in front of the radio PTT or MOX would work fine!
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 310 Posts
  • 32 Reply Likes
there is button on the back of the Microphone if you make a sound you don't want on the radio using VOX tap it once and it's kills the microphone tap it again and the microphone is active again.
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 310 Posts
  • 32 Reply Likes

The Hand written instructions from KT9D say " USE MUST USE VOX"  see the picture for quality

the con

Photo of Cliff

Cliff

  • 40 Posts
  • 1 Reply Like
Hi James,

I also have used a Jabra but an older version and what I did to get around the PTT problem was used a cheap 300Mhz wireless Relay got off of the infamous auction site , worked great just connect to the PTT on the rear of the flex or the mic connector, Just need the RX powered up and the remote is battery powered and very small.

Also used a similar setup in the car with a ic7000 and enabled easy mobile operation.

Just an idea anyway, Vox is ok but on the road dangerous :)

The new Jabra looks a bit sleeker than mine,

Cheers
Cliff VK2NP
Photo of Joe Herreweyers

Joe Herreweyers

  • 1 Post
  • 0 Reply Likes
Can someone provide a link or email address so I can investigate the headset further?

Thanks all,

Joe N9EMC
Photo of Mike W9OJ

Mike W9OJ

  • 88 Posts
  • 29 Reply Likes
His QRZ page says :  EMAIL ME Directly  re: WIRELESS HEADSETS
 
Lists his email address as blades1947.cb@gmail.com


73 de Mike W9OJ
Photo of Norm - W7CK

Norm - W7CK

  • 747 Posts
  • 152 Reply Likes
I have the same Jabra headset that I've been using on an Icom.  Works quite well.  I wired it with 1/8" stereo jacks.  I can plug the receive into the speaker out of just about any radio.  I then plug the xmt into the mic input of a Heil adapter for any radio.  Works well and is easy to plug into just about any rig when wired this way.


Any idea what he is asking for these?
Photo of Steve K9ZW

Steve K9ZW, Elmer

  • 1288 Posts
  • 657 Reply Likes
He often has an ad on QRZ.

A recent one is at http://forums.qrz.com/index.php?threa...

$100-110 range.

73

Steve
K9ZW