I hope someone saw this before . . . .
Since the latest 2018 WIN10 update WSJT V10 terminates after 2 seconds. It worked very well before. I did reinstall WSJT (multiple times - even with deleting it completely) kept this effect.
SSB, CW doesn't seem to be impacted.
WSJT-X seems to work well, too
Any idea . . . ? My rig: 6500 + Transverter + + + EME stuff.
Thank you !
Since the latest 2018 WIN10 update WSJT V10 terminates after 2 seconds. It worked very well before. I did reinstall WSJT (multiple times - even with deleting it completely) kept this effect.
SSB, CW doesn't seem to be impacted.
WSJT-X seems to work well, too
Any idea . . . ? My rig: 6500 + Transverter + + + EME stuff.
Thank you !
- 29 Posts
- 1 Reply Like
Posted 1 month ago
- 30 Posts
- 6 Reply Likes
Check your DAX control panel. Are all the audio streams working? This update has been known to cause DAX problems.
- 883 Posts
- 195 Reply Likes
Want to stop the updates? You are 30 seconds away. Set you computer wireless or ethernet to:
METERED MODE
METERED MODE
- 17 Posts
- 0 Reply Likes
I started having the same issue with Windows 7 64 bit and N1MM recently, tried
reloading the program to repair, clean reinstall same. Sounds like MS is
not playing well with others again. I checked firewall and antivirus no
issues I could find. I am not savvy enough to check the program for
anything that may have deleted or overwritten by an update. DAX appears to be ok but cant verify with out the program opening. Will post if I discover anything.
- 29 Posts
- 1 Reply Like
Thank you all.
I did a complete re-install according to Tim's recommendation.
Pretty lenghty process (SmartSDR, Drivers, deleted hidden ports and
finally WSJT 10). . .
Anyway - All is clean now and back to live.
I did a complete re-install according to Tim's recommendation.
Pretty lenghty process (SmartSDR, Drivers, deleted hidden ports and
finally WSJT 10). . .
Anyway - All is clean now and back to live.
- 456 Posts
- 113 Reply Likes
FWIW, are those of you who experience these problems leaving your radios powered on for extended periods of time? Do you apply updates while the Flex is (on) connected? I've not had any issues over the past 3 updates, which included one major update. My radio is off when not in use, especially when any updates are being applied. Windows 10 on a dedicated PC.
- 607 Posts
- 117 Reply Likes
I do the same as WA2SQQ
And I been experiencing the same results.
NO Flex radio software problems,
And I been experiencing the same results.
NO Flex radio software problems,
Related Categories
-
SmartSDR for Windows
- 4856 Conversations
- 1450 Followers
-
FLEX-6500 Signature Series SDR
- 3382 Conversations
- 872 Followers