WiFi vs Cat 5e / 6 Connectivity Maestro

  • 1
  • Question
  • Updated 3 weeks ago
  • (Edited)
When I connect my Maestro to my 6400 via WiFi, when I record my transmission, on playback it has a tendency to break up (choppiness).  I haven't had any reports of choppiness, or my transmission breaking up during contacts. This is due to packets dropping etc. If I connected my Maestro directly to the router / Gigabyte hub, I assume this would go away?? 

My Maestro is approximately 15 feet from the the wireless router. It registers mostly good and excellent as far as the connection. I do see lost packets...  I think that is typical for networks.

I think I am going to have to connect the Maestro via Cat 5 / directly to the hub / switch...

Thanks!
Photo of Barry Young

Barry Young

  • 70 Posts
  • 2 Reply Likes

Posted 3 weeks ago

  • 1
Photo of AH0U

AH0U

  • 273 Posts
  • 33 Reply Likes
You are correct
Photo of Gene Duprey

Gene Duprey

  • 27 Posts
  • 1 Reply Like
That is what I do and have had no problems.  I have a 20ft. run from my modem to my 6500 and also to my Maestro.  Have had no dropouts at all.
Photo of Chris DL5NAM

Chris DL5NAM

  • 612 Posts
  • 133 Reply Likes
.... but if you buy/use CAT cable, spent 5 cent more and take CAT 6 cable - it's the better one for Ham's and his RF :-)
Photo of Harald Welscher

Harald Welscher

  • 1 Post
  • 0 Reply Likes
Hello give your maestro in your router priority for WiFi, many router can do that in the WiFi settings.
That will fix it 73 Harald DJ4HW
Photo of Ted  VE3TRQ

Ted VE3TRQ

  • 188 Posts
  • 56 Reply Likes
No matter how close you are to your access point, other signals in the area can interfere with your WiFi. It is always a good idea to do a WiFi survey of your area, then avoid the busy frequencies. Often in busy areas (in North America anyway), 2.4 G is very congested, and 5 G frequencies provide a much better opportunity to avoid competition. WiFi backs off when it detects other signals on a frequency it wants to use.