WIDE Indicator doesn't go away

  • 1
  • Problem
  • Updated 3 years ago
  • Not a Problem
Using my 6700 Ver 1.3.8.126 for LW/MW/SWL along with ham operations.  I can replicate the WIDE indicator does not go away below 1.782 MHz no matter how zoomed in I am.  At 1.782, I can click the + and - for zooming the panadapter.  At the max zoomed in position, I have no WIDE indicator.  If I click twice on zoom out, the WIDE indicator comes on.  Below 1.782, the WIDE indicator will not extinguish even on the max zoomed in position.  Is the architecture designed this way or is this an anomaly?

Thanx!
73
Jim
Photo of Jim Shaw/AL7BA

Jim Shaw/AL7BA

  • 30 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Andrew Russell

Andrew Russell

  • 253 Posts
  • 33 Reply Likes
Official Response

Jim,

I think you are turning the 160m filter off and on.

 "Wide" when no preselecting filter is active.

No preselector on LF and MF so WIDE.

Andrew