Why would one want a GPSDO in their rig?

  • 2
  • Question
  • Updated 1 year ago
  • (Edited)

I am going to order a 6600 very soon and noted the GPSDO option on the order page. Why would one want this option? I operate 160-6 and do some digital modes including WSJT on all of those bands. What functionality would I gain with the GPSDO?

Zack  N8FNR

Photo of Zack Schindler

Zack Schindler

  • 74 Posts
  • 7 Reply Likes

Posted 1 year ago

  • 2
Photo of Ray Andrews, K9DUR

Ray Andrews, K9DUR, Elmer

  • 238 Posts
  • 61 Reply Likes
Zack,

You do not gain any functionality.  What you gain is long-term frequency stability/accuracy.

73, Ray, K9DUR
Photo of Zack Schindler

Zack Schindler

  • 74 Posts
  • 7 Reply Likes
Does it help much on 160-6 or just for VHF - microwave stuff?
Photo of HCampbell  WB4IVF

HCampbell WB4IVF

  • 170 Posts
  • 38 Reply Likes
I had the same question when I ordered my 6700, and found the following post, courtesy of K9ZW:

What is a GPSDO and Why Would I Want One? – by Steve Hicks – N5AC, VP Engineering

https://k9zw.wordpress.com/2012/10/12/flex-radio-flex-6x00-series-the-gpsdo-gps-disciplined-oscillator-option/

Howard
Photo of Zack Schindler

Zack Schindler

  • 74 Posts
  • 7 Reply Likes
Thanks for the replies Ray and Enos.
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2254 Posts
  • 879 Reply Likes
For average hams, it's overkill. 

For power users, it's a valuable tool. You can use it for bragging rights in the ARRL FMT too. 

Maybe when I get some spare $$$ I'll get one. I considered during initial purchase but decided it wasn't necessary for most of my needs. Instead, WWV calibration with each new software load worked good enough for regular ham use. 

Oh, and there's also geodiversity whenever that happens. But that seems to be pretty far off their radar for the time being.

Ria
Photo of Norm - W7CK

Norm - W7CK

  • 746 Posts
  • 151 Reply Likes
I'm talking about the 6700 which has 2m built in.  I'm NOT using a transverter.

Would the GPSDO help in this example?  When using 144.200 I have to have it tuned to something like 144.290 or something close to that in order to actually transmit on 144.200.  I then have to dial in a bit of RIT to receive the station.  It is nearly impossible using the digital modes.

Very dissatisfied.
Photo of Burch - K4QXX

Burch - K4QXX

  • 358 Posts
  • 59 Reply Likes
I don't use a transverter on 2 meters.  I used to use one on 1296 but I have never run a transverter on 2 meters.  I am using the built in 2 meters on my 6700.   You have a problem if it's off that much.  When I hear stations on 144.200, I have to tune to 144.200.250.  I just recently purchased an external 10Mhz reference because my 6700 was drifting really bad.  I just had it repaired under warranty but using the 10mhz reference gets me back to 144.200.  I don't think it will help you if you are off that much as it sounds like there is a problem if you have to tune to .290 to transmit on .200.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9148 Posts
  • 3465 Reply Likes
Norm- there is a defect for this issue, #3333.  The frequency calibration setting is not scaling up properly from the first Nyquist zone to the 2nd one where 2m is located.  Unfortunately, I do not have any information regarding a delivery scheduled only to say it is on the list for an upcoming release (not 2.0.x)
Photo of Norm - W7CK

Norm - W7CK

  • 746 Posts
  • 151 Reply Likes
Thanks Tim.  I bought the 6700 thinking "great it has 2m built in".  Haven't really been able to use it much at all.  Now its 5 years old and still no fix.

Frustrated.
Photo of philip.theis

philip.theis, Elmer

  • 112 Posts
  • 19 Reply Likes
I have been using two 6700's on 144 native for some time now. What problem do I have? Haven't noticed it yet.
Photo of George Molnar, KF2T

George Molnar, KF2T, Elmer

  • 1561 Posts
  • 552 Reply Likes
It's a big help on 6m with weak-signal digital modes. Also extremely valuable when you have transverters and can use the 10 MHz output to sync your whole system to GPS. For satellites, it's a big help. For weak signal and EME, I wouldn't want to be without it. 

For general HF SSB/CW and casual digital, it's not a big deal. The rig is plenty stable and accurate without it.
Photo of Peter K1PGV

Peter K1PGV, Elmer

  • 541 Posts
  • 315 Reply Likes
Ahhhhhh.... I still "fondly" remember the SDR-1000. During the first hour or so of operation your PSK31 traces would sloooooowly wander to the right.... it was kind of diagonal PSK31.

Now I'm a fan of the external GPSDO. I like to be dead on the frequency I think I'm on... just as an accuracy thing.

Peter
K1PGV
(Edited)
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9148 Posts
  • 3466 Reply Likes
Those were the good ole days ;-)
Photo of k3Tim

k3Tim

  • 831 Posts
  • 162 Reply Likes
For mobile / portable operation it gives one unbelievable frequency accuracy.
The man pack for Filed Day I'll be using has the GPS ant set up.
Another nice feature is it gives your grid square.
Maybe someday it can beat of a network timeserver.
Photo of Ross - K9COX

Ross - K9COX

  • 335 Posts
  • 101 Reply Likes
My Heath VF-1 was just fine for AM
Photo of Ryan - NC4RA

Ryan - NC4RA

  • 43 Posts
  • 7 Reply Likes
I was looking at trying one of the external BG7TBL ones. Was hoping to power it with the shack's power supply instead of adding another wall wart. However the input voltage states 11.7-12.9
Anyone have any experience with running one with 13.6V ?
Photo of Ray Andrews, K9DUR

Ray Andrews, K9DUR, Elmer

  • 238 Posts
  • 61 Reply Likes
A couple of silicon diodes in series would drop the voltage about 1.4v, making your 13.6VDC supply be 12.4VDC.  -- 73, Ray, K9DUR
Photo of Paul

Paul

  • 426 Posts
  • 123 Reply Likes
Or a low dropout (LDO) voltage regulator such as an LM2940 would give you a nominal 12V supply up to 1A. Output range is 11.4-12.6V output for an input range of between 13.6-26V - not bad.

http://www.ti.com/lit/ds/symlink/lm29...
Photo of Ryan - NC4RA

Ryan - NC4RA

  • 43 Posts
  • 7 Reply Likes
Great advice!! Thank you guys
Photo of Bob Brown - N8OB

Bob Brown - N8OB

  • 89 Posts
  • 6 Reply Likes
I'm running mine on 13.8v with no problems.  It is a nice unit that checks out very accurately.  I did not see any reason to add anything else to the radio.  I have used it for FMT and the last one was less than .25 hz off.