where is the secret hiding place for FlexSatPC ??

  • 1
  • Question
  • Updated 2 months ago
I want to use my Flex 6600 for satellite also , I see dropbox link to download it where is the secret hiding place for FlexSatPC?
Jim
WU5E
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 368 Posts
  • 39 Reply Likes

Posted 2 months ago

  • 1
Photo of Robert Lonn

Robert Lonn

  • 465 Posts
  • 177 Reply Likes
Photo of Michael Walker

Michael Walker, Employee

  • 1362 Posts
  • 401 Reply Likes
Hi Jim

You use the normal SATpc32.  

In SmartSDR CAT, create 2 Serial ports.  One for Slice A - VHF and one for Slice B for VHF.

Then, in SATpc32 you want to create Radio 1 to address Slice A Serial Port and Radio 2 to address Slice B's radio port.  

For each radio, select the Radio as a Kenwood TS2000 and you can use any baud rate, but 4800 is fast enough.

I don't have it fully setup yet, but that should work.  

I'm not sure about how to setup Autom Rx/Tx change and I think that you can leave Satellite Mode unchecked.

I'm sure there are others here that can show you their setup.

Mike 
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 368 Posts
  • 39 Reply Likes
i have a register copy of SATPC32 from amsat, thanks for the reply , this is pissing me off, guys keep putting the same link that PDF file, I email the Author he might respond . I did build two comports for SATPC32 and they are working. Im thinking that since the name Flex was in the name of the software this is why it's not on your site.
there should be a API to install. thanks for your time.
Photo of Mack McCormick

Mack McCormick, Elmer

  • 547 Posts
  • 183 Reply Likes
Jim,

Contact Dave, W0DHB, the author for a copy of FlexSatPC32. I don't want to list his email here without his permission but good in QRZ.

Mack
W4AX