Wemo link for remote powerup/down device

  • 2
  • Question
  • Updated 1 year ago
  • Answered
Need Link for Wemo Device that will work with my 6700 for powerup down using internet
Photo of James Madden

James Madden

  • 183 Posts
  • 11 Reply Likes

Posted 1 year ago

  • 2
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes
I use two WeMo Makers. One for the remote power on port of radio and one for turning on the Acom 2000a amp.

I also use a WeMo mini plug to turn the radio power supply on & off.

There are also Internet controllable relays readily available.

The WeMo devices are available on Amazon.

Dave wo2x
Photo of Steve - N4TTY

Steve - N4TTY

  • 85 Posts
  • 10 Reply Likes
Also, on page 28, section 7.12 of the hardware manual it states "Refer to the SmartSDR documentation for information on how to configure this input."  But what exactly does this refer to?  In the SmartSDR Software Users Guide v2.0.17 I haven't found any reference to configuring this input.  So what SmartSDR documentation are they referencing?
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes
Start SmartSDR. Go to Settings. In the main tab enable Remote On.

Dave wo2x



Photo of Steve - N4TTY

Steve - N4TTY

  • 85 Posts
  • 10 Reply Likes
Gotcha!  Thanks!  If that was in the "documentation" I missed it, but the latest edition is over 200 pages.  And now with the picture I think I remember seeing that on the Radio Setup window, just haven't found it in the documentation anywhere.

And by the way I like your "nickname" for your radio!
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes
:-)
Photo of Steve - N4TTY

Steve - N4TTY

  • 85 Posts
  • 10 Reply Likes
I'm going to look into the Denkovi products, but just found out my local MicroCenter has 2 (according to web page) available at $79.99.
Photo of James Madden

James Madden

  • 183 Posts
  • 11 Reply Likes
This is from amazon is this what you are using?
Belkin WeMo Maker Wireless
Thanks
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes
Yes. I like them easy to set up and the WeMo app works fine on both Android and iPhone.

Dave wo2x
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 2767 Posts
  • 610 Reply Likes
Amazon. ca has them in stock Dave.
Photo of James Madden

James Madden

  • 183 Posts
  • 11 Reply Likes
Thanks Dave. Might you have a diagram showing how they are connected? Jim
Photo of Steve - N4TTY

Steve - N4TTY

  • 85 Posts
  • 10 Reply Likes
Wow, just checked on Amazon (for the WeMo Maker) and from Amazon it is not in stock and they don't know if or when it will be available, but they will sell you one from another supplier for $107.00 plus $33.52 shipping!  Now that sounds like a rip off!
Photo of Chris DL5NAM

Chris DL5NAM

  • 589 Posts
  • 128 Reply Likes
.... or TP-Link HS100
Photo of Steve - N4TTY

Steve - N4TTY

  • 85 Posts
  • 10 Reply Likes
Don't think the TP-Link HS100 has the "relay" ability to remote switch the Flex on/off.

It will turn a 12v power supply on and off just as the WeMo Mini will.

Am I wrong?
Photo of Chris DL5NAM

Chris DL5NAM

  • 589 Posts
  • 128 Reply Likes
Sorry - YES your wrong

100 - 230 VAC
16A
3680W
Photo of Steve - N4TTY

Steve - N4TTY

  • 85 Posts
  • 10 Reply Likes
Chris, thanks for the quick response, but help me understand how the TP-Link HS100 can be wired to the remote power RCA jack on the back of the FlexRadio.

Yes the HS100 should be able to handle the power requirements of a 12v supply needed to power the Flex, but I didn't see any relay contacts to actuate the remote power feature of the radio.
Photo of Chuck - W9WLX

Chuck - W9WLX

  • 3 Posts
  • 0 Reply Likes
Any more information about purchasing a WeMo Maker?  They seem to be out of stock and links to the Belkin site give a 404 error.  While the Belkin site has support information, there seems to be no info about current availability.  I'm questioning if the product is now discontinued.

Chuck, W9WLX  
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes
Hi Chuck,

I just posted elsewhere in this thread. If you have a Micro Center nearby, check their stock online. http://www.microcenter.com/search/search_results.aspx?Ntt=wemo+maker

Make sure you choose your local Micro Center (along the top of the page). Or if you know someone who lives near a Micro Center that has stock you can always ask them to grab it for you. PayPay Friends and Family payment to send money to your friend would work :-)

Dave wo2x
Photo of Larry - W8LLL

Larry - W8LLL

  • 389 Posts
  • 76 Reply Likes
Global cache itach ip2cc is another option, it has 3 contact relays on it. Simple home app works well with it.
(Edited)
Photo of Chuck - W9WLX

Chuck - W9WLX

  • 3 Posts
  • 0 Reply Likes
What iOS apps work well with the ip2cc?
Photo of Larry - W8LLL

Larry - W8LLL

  • 389 Posts
  • 76 Reply Likes
The app I use is roomie simple home.
(Edited)
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3541 Posts
  • 1396 Reply Likes
I originally used 3 WEMO for remote control but I found them to bea bit Flaky. So I have now replaced them with 2 x 8 port digital Logger web Switches

Why? Because I found that i needed far more than 3 ports to control my station and do remote reboots

Plus they have an Internet keep alive which will reboot modems and routers if the internet fails
https://dlidirect.com/products/web-po...



Photo of Phil - WG5D

Phil - WG5D

  • 39 Posts
  • 3 Reply Likes
Worth noting - I am using a Raspberry Pi 3 to control the power to the radio remotely. It was pretty easy to set up, and the GPIO levels are compatible with the radio. In a nutshell, the Pi is running the Apache web server and that provides a web interface that is used to turn the radio on and off remotely. Nothing more needed than the Pi to control the Flex. As an added bonus I have a scrolling display on the Pi that shows NTP synchronized time (UTC) so it looks cool too :)
Photo of Mark - WS7M

Mark - WS7M

  • 993 Posts
  • 353 Reply Likes
Hi Phil, Would you be willing to share your web code that does this?  I would like to go that route for controlling not only the flex on/off but also an amp.

Let me know:  ws7m@arrl.net
Photo of Phil - WG5D

Phil - WG5D

  • 39 Posts
  • 3 Reply Likes
Certainly - I can back up the SD card and make an image of it and post it online for anyone that wants it. Considering how many GPIO ports the Pi has, you can control a lot of stuff with it :)

You should be able to modify the code easily to add additional devices, it is written in Python and HTML, both are easy to work with. I should mention that currently there is no authentication required to get the the web page so if you connect or route directly to the Pi from the Internet, you might want to add an authentication mechanism as well or anyone on the interwebs could control your radio. With my setup, I either VPN to my home network to get to the web interface or use TeamViewer to access my home computer and control the Pi (and the radio) from there.

Once I get the image created and uploaded, I will post a link for it. 
Photo of Steve - N4TTY

Steve - N4TTY

  • 85 Posts
  • 10 Reply Likes
Why not post the php and HTML instead of an entire image. I'm sure there are others that have multiple RasPi that don't need an entire image.
Photo of Phil - WG5D

Phil - WG5D

  • 39 Posts
  • 3 Reply Likes
I did just that for Mark, WS7M as he already has a Pi running a web server. Let's see how that goes :) 

There is some html, some php, and a Python 3 program that makes it all work. Sounds complex, but it is really quite easy if you know the Pi.

I will be glad to share the code - email me direct. Info is on QRZ. 
Photo of spopiela

spopiela

  • 81 Posts
  • 10 Reply Likes
Just what I have been looking for!   My biggest problem is when the router dies after a power glitch or extended power failure and I can't get in remotely over WAN to reset it. I suffered for days recently waIting to get home to reset the router after a power failure at home!! The router was dead. This will help with the auto ping functionality. Too bad that they are out of stock.
 I use NEO swithches that can be purchesed online for turning on power supply and radio. I agree, even these switches can be flaky. Once set up, they never go down.
https://www.amazon.com/Ankuoo-Smart-Plug-Wi-Fi-White/dp/B00NAX2GVU
Photo of Varistor

Varistor

  • 333 Posts
  • 73 Reply Likes
You may want to consider getting a GSM/SMS switch for the times when the router, cable modem, DSL modem, etc. needs to be rebooted. I use one at my station as my internet connection is over 4G and about once a month needs a reboot.
(Edited)
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3541 Posts
  • 1396 Reply Likes
Which GSM switch do you use.? I have yet to find one that does not have a monthly cell phone charge
Photo of Varistor

Varistor

  • 333 Posts
  • 73 Reply Likes
I use an older model and am consider getting one of the new ones as they have an iOS app.

Yes, they all require a SIM card. I use a prepaid Rogers card and pay no monthly fees.
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3541 Posts
  • 1396 Reply Likes
I have gone thru a few internet outages when I was thousands of Miles and weeks away from home. The data logger solved many of these problems but I still installed a secondary path to my home network with the addition of a wireless hotspot.
Photo of spopiela

spopiela

  • 81 Posts
  • 10 Reply Likes
I was upset and aggravated the first time that my router wouldn't respond when I was remote via WAN. If a power transient happens or the router can't get back in step with the modem after power comes up, you are out of business. Modem has to settle down first, then router, then rest of the clients on the router. I have many items including weatherstations, cameras etc. The only way to recorrect is to reset the router. I probably don't need the hotspot but a device that can't ping the internet from the home base knows that power is on and there is no internet so it resets the router should do the job!
Stan
Photo of Varistor

Varistor

  • 333 Posts
  • 73 Reply Likes
Get a SMS switch that you can control via simple text messages or just by calling it from your phone. Works great.
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3541 Posts
  • 1396 Reply Likes

@spopiela

The Datalogger Web Switch has an auto ping and scripting facility.

When my internet fails, it reboots the modem first, the follows the script to reboot the other devices in the correct sequence and timing.


The primary path is a Cable Modem 350Mb/s x 30Mb/s

Still have a second Internet path through a 4G Hotspot and have double homed my LAN so that there is an alternative path to the Internet

I found that when running remote you must try to eliminate all possible single points of failure..with the Internet connections being a primary source of such failures.

Photo of spopiela

spopiela

  • 81 Posts
  • 10 Reply Likes
So I use phone cell signal to reset a router when I can't connect to my home via WAN?
Photo of Varistor

Varistor

  • 333 Posts
  • 73 Reply Likes
Yes, this is correct. You should assume that there will be times when you cannot reach the router for whatever reason and you need to reboot it.
Photo of James Madden

James Madden

  • 183 Posts
  • 11 Reply Likes
The devices shown do not appear to have the relay needed for the rca jack remote on/off. Or am I missing something?
Photo of spopiela

spopiela

  • 81 Posts
  • 10 Reply Likes
You need to attach a relay that  opens or closes with 115v power to the coil of the relay. I use http://www.digital-loggers.com/ac.html. The relay power cord connects to the a/c wall switch that you control over your wifi. This relay will be open with no power and then closes if the switch is turned on. You must select the normally open contacts. connect the relay connects to the rca connection on the back of the radio.
Stan
Photo of James Madden

James Madden

  • 183 Posts
  • 11 Reply Likes
Thanks very much
Photo of Mark - WS7M

Mark - WS7M

  • 994 Posts
  • 354 Reply Likes
I use the digital loggers A/C power switch device in Howard's post.  I simply have the remote on terminal on the back of the flex shorted.  No relay.

I just have the digital logger cycle power to the 12V supply and everything reboots nicely.  Makes it a little easier since you don't need a relay in addition to some kind of power switch.  Do the job with one thing.

For a while I had a battery backup to my DC power supply but found the batteries were going bad.  So I took that out of the loop.  With battery backup you still will need some way to toggle the remote on port of the radio.

However one time my Flex hung.  Toggling remote on did not restart it.  That is when I redesigned things to cycle the D/C power.
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3541 Posts
  • 1396 Reply Likes
I do both. One port on my digital logger for remote power on/off and oneport for main power for the Flex

It gives me the option of both hard and soft resets for my 6700

I have just added a port fort PTT as well so I can remotely register and de register SmartLink
Photo of spopiela

spopiela

  • 81 Posts
  • 10 Reply Likes
Howard, where do you connect the relay for PTT?
Stan
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1138 Posts
  • 235 Reply Likes
Either the PTT RCA jack or PTT & Ground in Accy jack on back of radio. That way you can That way you can remote desktop into a PC on local radio LAN and be able to toggle PTT when setting up SmartLink remotely.

You will need this if changing the SmartLink account when you are remote from the shack as you need to provide a local PTT when registering radio.

Dave wo2x
Photo of spopiela

spopiela

  • 81 Posts
  • 10 Reply Likes
Dave, Thanks. If I VPN into my home network and turn on smartsdr can I set up smart link remotely using the PTT toggle process without using a remote desktop application? I'd rather leave the home computer off and just runsmartsdr  through my router VPN. If this works, I cane have total remote control , including re-registering the radio ,  using the radio over VPN or smartlink and  leaving the home computer off. WOW!
Stan
N1THL
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3541 Posts
  • 1396 Reply Likes
Correct