• 1
  • Question
  • Updated 5 years ago
6500 on RTTY. With the RF Power button set to 50%, why is there such a big difference in the power out between RTTY & CW? Getting about 40 watts on CW and 20 on RTTY. Is the internals set to limit drive because of 100% duty?
Photo of Vern


  • 64 Posts
  • 4 Reply Likes

Posted 5 years ago

  • 1
Photo of k3Tim


  • 931 Posts
  • 197 Reply Likes
I tried this test and with FlDigi was able to put out same RF power level in CW / RTTY at 50% setting.  The "audio" in to the Flex needs to be near the red-line in the Level meter.  If it's low, RF output will be low accordingly.  I would check that first.