w9hly

  • 1
  • Question
  • Updated 3 years ago
6500 on RTTY. With the RF Power button set to 50%, why is there such a big difference in the power out between RTTY & CW? Getting about 40 watts on CW and 20 on RTTY. Is the internals set to limit drive because of 100% duty?
Vern
Photo of Vern

Vern

  • 64 Posts
  • 4 Reply Likes

Posted 3 years ago

  • 1
Photo of k3Tim

k3Tim

  • 833 Posts
  • 163 Reply Likes
I tried this test and with FlDigi was able to put out same RF power level in CW / RTTY at 50% setting.  The "audio" in to the Flex needs to be near the red-line in the Level meter.  If it's low, RF output will be low accordingly.  I would check that first.

GL/Tim