Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Virtual Comm Port Software That Works with SmartCAT & Windows

Rick
Rick Member ✭✭
edited May 2019 in Third-Party Software
Overtime using various versions of SSDR and SmartCAT I've learned how Windows doesn't  play nice with Virtual Serial Port Emulator. This usually isn't a problem until you introduce SmartCAT to the mix which apparently is unaware of any ports added by VSPE because of a Windows Issue. Has anyone found that this problem doesn't exist with either VSPManager or Comm0Comm or some other virtual serial port application that I'm unaware of? If so I'd love to know! The work arround is a nusinance that I'd like to avoid as it trips me up at least once a day. 
Tnx
73
Rick, W2JAZ

Answers

  • Marty VK2VCC
    Marty VK2VCC Member
    edited August 2017
    i run a flex3k and had similar issues. i now run a combination of VSPmanager and VSPE with no issues. this combined with Log4OM and fldigi , wsjt and option of another 2 ext programs if i wish. i found running vspmanager on its own couldnt handle the traffic. Vspe was required to create a split port and it works but yes its virtual creations are hidden in the background. vspmanager places port emulation within windows always. another thing to watch is the baud rates .i run max of 57600 . i have read other guys here use 114000 !! when you say yours trips you up , can you give me a better example of your use. cheers. ps i have spent many hrs on this stuff, and mine seems stable atm. i do have a diagram of my setup somewhere (xls file).i will try and find it or dropbox it.
  • Rick
    Rick Member ✭✭
    edited August 2017
    But are you running SmartCAT at the same time as the other virtual serial apps?
  • Jay Nation
    Jay Nation Member ✭✭
    edited May 2019

    Rick

    vspManager , and SmartCAT, are co-existing fine, on my Win10 box.
    You do have to be careful when creating the ports, that either vspM or SmartCAT don't ever assign any ports used by the other. And also you need to watch out for any ghost ports and remove them in Dev Manager. The two apps can't see the port assignments the other app makes, and will often try to assign port numbers the other has already assigned. When removing Virtual port always first try to use the app that created them.

    My guess is, anyone trying to run both a Legacy Flexradio, and a 6xxx series Flexradio,from the same PC has had to figure this out, so that both PowerSDR and SmartSDR will have Com Ports to use with digital apps.

    And vspManager is also the only option for creating shared ports, that will probably be needed. SmartCAT no longer has that ability.   

      SDRgadgets

    #FlexRadio IRC chat

      73, Jay - NO5J

  • Marty VK2VCC
    Marty VK2VCC Member
    edited March 2017
    im sure you could using Vspe with a splitter port
  • Rick
    Rick Member ✭✭
    edited March 2017
    But I wonder if they would coexist in a windows 7 environment which is what I have. I've run VSPManager before and I seem to recall I had the same issue, but maybe not. I know that VSP Manager ports do actually show up in Device Manager which probably means they are Windows signed.  I hate to do it but maybe I should upgrade to Win 10. Too bad I missed the free window!
    73
    Rick
  • Marty VK2VCC
    Marty VK2VCC Member
    edited March 2017
    zoom in on this xls.. it may give you insight to fix port issues. do you have a direct email? my xls file will not send here.
  • Rick
    Rick Member ✭✭
    edited March 2017
    rjlawn at gmail dot com
  • Jay Nation
    Jay Nation Member ✭✭
    edited March 2017
    Rick

    It should work on Win7 too, I used to do the same on win7 before win10. Win10 so far has worked flawlessly for me but I keep an eye on it for trouble. I've seen things I never saw when using Win7.

      SDRgadgets

    #FlexRadio IRC chat

      73, Jay - NO5J

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.