Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Very odd transmitting behavior

Charles - K5UA
Charles - K5UA Member ✭✭
edited July 2018 in SmartSDR for Windows
Has anyone else had this unexpected behavior happen on a Flex 6500..... Turn on the Flex and the right hand panel was visible but no panadapter. Created the panadapter and it came up on 40 meters. Changed band to 20 meters, and instead of the A vfo going to 20 meters, there was a B vfo created. No problem, just made the B vfo the transmit vfo. Started to transmit on 20 meter SSB and noticed the Acomm 2000a was still on 40 meters. Could not get the Acom 2000a to follow me to 20 meters. On a hunch, changed antenna back to 40 meters and SWR was normal. For some stange reason, the Flex was transmitting on the 40 meter A vfo instead of the 20 meter B vfo (which was the designated XMT vfo). Finally had to close out SSDR and the problem went away. Just wanted to alert the programmers about this stange behavior. Have not seen this happen in 7 weeks of using the 6500, and it may never happen again.

Comments

  • Dale KB5VE
    Dale KB5VE Member ✭✭
    edited July 2018
    Charles the fact the b vfo came up is a giveaway. You had a "A" vfoopen and it was hid. I have had this happened once also do not know what happened.
  • W0QKL
    W0QKL Member
    edited July 2018
    Have had this problem with the 1.0.24 version it happens when you split the A and B accross bands, or if you move one of the splits way out of the band. Example say you are on 20 m band with A and B then move A by grabbing it and slid it down the band leaving B where it is say you slid A to 12 MHz then try to change bands to say 40 or 80m or turn the radio off then on or even exit and restart the software, you will find all kinds of abnormal behavior. I have dropped back to Ver 1.0.0 until the next release because of numerous problems encountered with the beta release.
  • Charles - K5UA
    Charles - K5UA Member ✭✭
    edited March 2015
    Seems so strange that the VFO desginated to transmit did not and the VFO that was supposed to receive was actually transmitting. Very odd. Hopefully will not happen again. Bad for the amp to be transmitting on the wrong antenna.
  • Charles - K5UA
    Charles - K5UA Member ✭✭
    edited March 2015
    Thanks for your explanation.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.