V 1.3 CWX Praise. and Observation and a Question

Praise -- CWX is working nicely. Great Job!

Question - Disabling "Breakin" prevents transmitting from the paddle but still sends from CWX. Is that intended? See snapshot below. It would be nice to disable sending from CWX also for consistency and so you can test without having to remember to lower the power to 0. Not a big deal but was a surprise.

**** Breakin is off, CWX still keys radio ****
Image: https://d2r1vs3d9006ap.cloudfront.net/s3_images/1089086/RackMultipart20140818-16226-1lojaci-snap032_inline.jpg?1408399424

Image: https://d2r1vs3d9006ap.cloudfront.net/s3_images/1089086/RackMultipart20140818-16226-1lojaci-snap032_inline.jpg?1408399424

Observation - I set up 3 of the function keys and noticed that even when the CWX panel is not being displayed, the Keyboard F-Keys will still send the appropriate CW. That is great, and saves screen space.

***** setup the functions keys ***
**** close the CWX panel *****
**** press the function key on the keyboard ***
Image: https://d2r1vs3d9006ap.cloudfront.net/s3_images/1089087/RackMultipart20140818-21792-gi3zdv-snap031_inline.jpg?1408399494

Image: https://d2r1vs3d9006ap.cloudfront.net/s3_images/1089087/RackMultipart20140818-21792-gi3zdv-snap031_inline.jpg?1408399494

Regards, Al / NN4ZZ
al (at) nn4zz (dot) com

Al / NN4ZZ

1710 Posts
581 Reply Likes

Posted 4 years ago

4 years ago

Tim - W4TME, Customer Experience Manager

9152 Posts
3471 Reply Likes

Breakin is only applicable to the internal keyer. CWX is not an extension of the keyer but a separate CW sending feature so you can use both in the same QSO

Comment

1 person likes this

2014-08-18T23:27:36+00:00

Al / NN4ZZ

1710 Posts
581 Reply Likes

Thanks Tim, not a problem. I was just expecting that turning BREAKIN OFF would disable keying from both the paddle and CWX.

Regards, Al / NN4ZZ
al (at) nn4zz (dot) com

2014-08-19T01:48:04+00:00

Ken - NM9P, Elmer

4007 Posts
1233 Reply Likes

I'll have to remember that when I leave the rig in CW mode.... and the cat jumps up and lays down on the keyboard!

2014-08-19T15:25:08+00:00

Bill-W9OL

726 Posts
56 Reply Likes

I have a 110# GSD. He learned if he walks up and lays his head on the key board. He get's my attention real fast.
Got to get him his own call. Maybe K9FLX????

(Edited)

2014-08-19T21:29:07+00:00

Steve N4LQ

568 Posts
92 Reply Likes

Turning Breakin off should kill the power in CWX. Somehow this needs to be linked. Breakin off/on kills power for a straight key or keyer. This needs to be consistent. I found this out after transmitting gibberish for a while with the keyboard!

2014-08-19T21:39:23+00:00

W5XZ - dan

564 Posts
83 Reply Likes

I'd like to see the internal keyer and CWX have the same speed, myself..

73, w5xz, dan

2014-08-20T00:34:39+00:00

Steve N4LQ

568 Posts
92 Reply Likes

That is so obvious isn't it?