v2.3.9 power slider bug still an issue

  • 1
  • Problem
  • Updated 4 months ago
  • Solved
  • (Edited)
Upgraded 6700 to 2.3.9 but the problem with the RF Power slider is still an issue.


If you set Max Power to 15 watts you can still move the RF Power slider to 100.


If you then try to move the Tune to 100 it snaps back to 15 and drags the RF Power back to 15 as well. But then you can move just the RF Power slider back up to 100 even though the Max Power is still set to 15.


The actual output seems to still be capped at the Max Power level so the RF Power slider is not reflecting the true power is set beyond the Max Power setting. This problem started in 2.3.7
Photo of Pat N6PAT

Pat N6PAT

  • 256 Posts
  • 56 Reply Likes

Posted 4 months ago

  • 1
Photo of Ed.G

Ed.G, Software Engineer

  • 88 Posts
  • 20 Reply Likes
Official Response
Thanks for the report, this is a bug. The power will still be limited so there is no danger of putting out too much power. 

This should be fixed in the next release.