USB vs DIGIU

  • 2
  • Question
  • Updated 3 years ago
  • Answered
When running digital modes, how does DIGIU differ from USB?
Photo of Larry - W8LLL

Larry - W8LLL

  • 354 Posts
  • 68 Reply Likes

Posted 3 years ago

  • 2
Photo of Andrew O'Brien

Andrew O'Brien

  • 376 Posts
  • 43 Reply Likes
DIGU settings are stripped of filter settings and audio tailoring that can adversely impact reception and transmission of digital mode signals. Mic lgain levels are also different to take in to account digital modes .
Andy K3UK
Photo of Jay / NO5J

Jay / NO5J

  • 1367 Posts
  • 196 Reply Likes
Larry
DIGU/L bypasses EQ and the compressor, and uses different filters bandwidths that center at 1500hz.
73, Jay - NO5J 
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 869 Posts
  • 157 Reply Likes
You can also set your DIGU mode to 5kHz for digital modes
and leave USB at the standard 2,7kHz. I have set profiles
for that.
(Edited)
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 3825 Posts
  • 1164 Reply Likes
Correct. Compression/processor and TX EQ are locked out so that they do not distort the digital signal.

I also seem to remember something about the filter slopes being a little softer, which reduces latency a little and improves turn-around time. (Tim or Steve my clarify this.)