Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

SmartSDR v3.7.4 and the SmartSDR v3.7.4 Release Notes | SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.8.8 and the Power Genius XL Release Notes v3.8.8
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

USB cables

Options
Rob Swannell
Rob Swannell Member
edited December 2019 in SmartSDR for Windows
USB cables to Bandmaster 3 I have a flex 6700 and have just put in the new beta software. Also got the FTDI c232hm lead to connect from 6700 to Bandmaster switch , , I have done the settings in USB cables on smart set but not getting the band data to Bandmaster switch I have different settings on Bandmaster but no commutation 6700, I notice when the ,lead is connected from the 6700 to the band master , it locks the Bandmaster from commutation get with my laptop to change setting in the band master switch. Any ideas where I am going wrong??

Answers

  • Mike va3mw
    Mike va3mw Member ✭✭
    edited February 2018
    Options
    Have you had a chance to review the configuration guide yet? You didn't mention that in your request. http://www.flexradio.com/downloads/usb-cable-interface-guide-pdf/ Mike va3mw
  • Rob Swannell
    Rob Swannell Member
    edited December 2016
    Options
    Sorry I did check the configuration file in nots for USB cables,
  • Rob Swannell
    Rob Swannell Member
    edited December 2016
    Options
    I put the relative colour cables on the pins on the db9 serial plug as discribed in the notes on USB cables
  • Mack
    Mack Member ✭✭✭
    edited March 2019
    Options
    Rob,

    I'm using two Bandmaster 3 with triggers set to ANT 1 and ANT 2. They in turn control two 2 X 8 Antenna Switches and two Bandpass Filters. The setup in the USB manual is from my system and the one that I'm using.

    Make sure you're using the following wires to the DB-9 connector on the back of the BandMaster:
    Orange - Band Data A (Pin 1)
    Yellow - Band Data B (Pin 6)
    Green - Band Data C (Pin 8)
    Brown - Band Data D (Pin 4)

    Black - Ground (Pin 5) If you've done this make sure you use the BandMaster Software App (connected via USB) to set the switch to BCD Band Data. This should work perfectly.

    If it still doesn't work send me an email to w4ax.mack@gmail.com with your phone number and I'll try to help you over the phone.

    73,

    Mack
    W4AX
    Alpha Tester
  • Mack
    Mack Member ✭✭✭
    edited March 2019
    Options
    Note: there is an error in the manual. The black (ground ) must be connected to pin 5 on the BandMaster. I've informed Flex and they are updating the manual. Confession: this is probably my error since I provide this configuration to them. I must typed 7 instead of 5. Apologies. I did speak with Rob and we have his BandMaster working.
  • NX6D Dave
    NX6D Dave Member ✭✭
    edited December 2019
    Options
    Now corrected in version 1.3 of the manual.  Thanks for finding this error.  The manual will be updated online soon.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories