USB-Cable

  • 1
  • Question
  • Updated 3 years ago
  • Answered

Hi all,

     I was fascinated about the new USB cable option and hoped to finally succeed in connecting my tuner to my 6700 radio after several attempts with DUtil failed. The tuner is as old as my Yaesu FT 2000 and the two worked together perfectly using the BCD band data A, B, C and D supplied by the Yaesu trx. The tuner is a Hamware AT-402 unit.

     To connect my 6700 and the tuner I would prefer to use the FTDI USB to serial Cable DB9M but the USB-Cable Interface Guide does not address the 4 pins of the DB9M providing the 4 BCD signals.

Any idea? Thank you

vy 73, Dieter, DJ1YG


Photo of DJ1YG

DJ1YG

  • 4 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Mack McCormick

Mack McCormick, Elmer

  • 523 Posts
  • 179 Reply Likes
Official Response
Dieter,

You must use a bit cable like this one sold by Flex or other distributors. https://www.amazon.com/FTDI-C232HM-ED... . Look at the USB guide and you'll use wires 2, 3, 4, and 5 to your own connector. Set the USB on the Flex to BCD. It'll work.

73,

Mack
W4AX
Alpha Tester
Photo of Jon - KF2E

Jon - KF2E

  • 684 Posts
  • 226 Reply Likes
I believe you would need to use the USB to Parallel cable. Here is the link...

http://cart.flexradio.com/USB-to-Parallel-adapter-for-the-FLEX-6000-series_p_1001.html

This is the link with the data to use the cable...

http://www.flexradio.com/downloads/usb-cable-interface-guide-pdf/?_ga=1.249011335.1678774256.1417055...

Jon...kf2e
Photo of Rob Blackie

Rob Blackie

  • 122 Posts
  • 8 Reply Likes
what exactly IS the deal with this "usb cables" thingy in the newest beta release ? whats it for ?
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9198 Posts
  • 3558 Reply Likes
Al - your question would be better served for the Community if you would create a new topic for the DDUtil question.
Photo of Al / NN4ZZ

Al / NN4ZZ

  • 1853 Posts
  • 672 Reply Likes
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9198 Posts
  • 3558 Reply Likes
Thanks Al.
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2314 Posts
  • 956 Reply Likes
One advantage that is overlooked for the serial cable feature is that it's possible to now assign CAT data by antenna port and not just by slice. This was not in DDUtil, at least not that I saw. DDUtil forced you to the TX slice, always and it only really was useful on one port. This didn't work for some SO2R setups or more complicated setups with antenna switches and tunable antennas (eg SteppIR). 
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2314 Posts
  • 956 Reply Likes
One advantage that is overlooked for the serial cable feature is that it's possible to now assign CAT data by antenna port and not just by slice. This was not in DDUtil, at least not that I saw. DDUtil forced you to the TX slice, always and it only really was useful on one port. This didn't work for some SO2R setups or more complicated setups with antenna switches and tunable antennas (eg SteppIR).