Unhandled Exception 1.6.17

  • 1
  • Problem
  • Updated 2 years ago
  • Solved
Well, everything was working ok for a day or two.  Suddenly I am getting un-handled exception messages a couple of seconds after connecting to the radio (see attached image).  Configuration is 6500 direct connected to Win7 with a FlexControl.  A complete un-install was done of the prior release a couple of days ago before an uneventful install of 1.6.17.  The only issue I had was the need to change the port for the FlexControl.

Please help...

Thanks, Ron
K2RAS
Photo of Ron

Ron

  • 52 Posts
  • 4 Reply Likes

Posted 2 years ago

  • 1
Photo of Ron

Ron

  • 52 Posts
  • 4 Reply Likes
Official Response
I actually found the link you provided by further searching the forum.  I set the port to a high number and it solved the issue.  I thought I had closed this ticket, but perhaps I was not successful in doing so.  FYI, I had another issue with the FlexController working erratically.  I found another post suggesting to tighten the knob screw (imagine that), and that solved that problem also.  The forum works!

Thanks, Ron K2RAS