Unable to register with Smartlin servers

  • 1
  • Problem
  • Updated 11 months ago
  • Solved
I am running a 6700 signature.  Yesterday I was able to register and unregister with the smartlink servers.  Today I am getting a message can't connect to servers.  I powered down 12v.  Powered it up and then did a master reset.  Same thing.  I am connected to the Internet.  I also have not been able to connect the ports but that is because I am behind two routers.  Only one of them is using DHCP.  I will figure out that portion after I can again connect to the smartlink servers.

Thanks,
Jim KA4OJN
Photo of Jim-KA4OJN

Jim-KA4OJN

  • 9 Posts
  • 0 Reply Likes

Posted 11 months ago

  • 1
Photo of Jim-KA4OJN

Jim-KA4OJN

  • 9 Posts
  • 0 Reply Likes
Official Response
Hi,
After the master reset the IP address reset.  I turned on DHCP behind this router to get an IP address than set a static address and now I am connecting with the radio again.  I am on the LAN as I have not gotten smartlink going yet.  Everything but SmartLink appears to be working.  I have opened the ports in both routers but no luck.  I can now register the radio with the SmartLink servers.  So all that is left is finding out how to open the ports the way the radio wants them.

Thanks
Jim KA4OJN