Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Tx/Rx switching with 1.0.24 using timings in radio tx setup.

K4EAR
K4EAR Member ✭✭
edited August 2016 in SmartSDR for Windows
I use TX1, 2, 3 in varying situations... But the TX RF output holds on with release of ptt until the cumulative total of the tx1,2, 3 timings expire, regardless of the enable/disable settings in the setup tx tab. IOW, if I have TX1 set to 0ms and TX2 and 3 set for 100 and 200ms and "disabled" the rf output will follow on with release of ptt for 300ms. This follows for both PTT or CW breakin' with a small delay or 0 delay for QSK.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.