TX slice not toggling according to N1MM SO2R slice command suddenly

  • 1
  • Question
  • Updated 1 month ago
  • (Edited)
Hi contesters, anyone experienced this problem. Loading previous global and TX profiles that allowed toggling of TX slice as N1MM changes then in SO2R will not accomplish this TX slice toggling anymore. I can switch active slices in N1MM but TX slice remains. Only way is to do this manually. 
The OTRSP config is correct. Is there any other way to troubleshoot this unlucky behaviour?
Latest versions of Smart SDR and N1MM is being used.
Soon CQ WW....:( 
Photo of Kari Gustafsson SM0HRP

Kari Gustafsson SM0HRP, Elmer

  • 234 Posts
  • 20 Reply Likes

Posted 1 month ago

  • 1
Photo of Andy - KU7T

Andy - KU7T

  • 176 Posts
  • 17 Reply Likes
Will it fix itself if you use a few CTRL+left and CTRL+right sequences?

Andy
KU7T
Photo of Kari Gustafsson SM0HRP

Kari Gustafsson SM0HRP, Elmer

  • 234 Posts
  • 20 Reply Likes
Hi Andy, I doubt. I used the Pause key to switch between slices since it is easier and always have worked.
Have you tried to switch slices after the new versions of both software?
Do you know how to troubleshot the OTRSP commands and if they are issued?
Photo of Andy - KU7T

Andy - KU7T

  • 176 Posts
  • 17 Reply Likes
Did you try it?

Andy
KU7T
Photo of Kari Gustafsson SM0HRP

Kari Gustafsson SM0HRP, Elmer

  • 234 Posts
  • 20 Reply Likes
No, I will.
73 Kari
Photo of Kari Gustafsson SM0HRP

Kari Gustafsson SM0HRP, Elmer

  • 234 Posts
  • 20 Reply Likes
HI Andy, 
Just tested and CTRL+left arrow or right does not work either.
When I look in the profile manager (global profile is a SO2R profile) and switch TX slice by pressing manually on the TX1 button or TX2 button I do se that SO2R_TX1 is loaded and SO2R_TX2 is loaded respectively for the TX profile. The way it should. 
So is it N1MM and/or OTRSP that is not working correcty?