TX Relay Output asserted until SmartSDR started

  • 1
  • Problem
  • Updated 4 years ago
  • Acknowledged
Until the 6300 is powered on and SmartSDR is started, the TX output is asserted, that is if a device connected to TX is powered on, its PTT will be activated.

There was a similar thread "TX asserted with no active TX slice" but it is no longer active.

This has the potential to cause a problem if an external device is activated (PTT) with no drive.

This seems to be a hardware problem as it happens before the 6300 is powered on and SmartSDR started.

Is there a solution to this besides remembering not to turn on the external device before SmartSDR is up and running. My memory ain't what it used to be.

Ron 
Photo of Ron Parsons

Ron Parsons

  • 73 Posts
  • 10 Reply Likes

Posted 4 years ago

  • 1
Photo of Burch - K4QXX

Burch - K4QXX

  • 358 Posts
  • 59 Reply Likes
I reported this as well some time back.  It's still an issue in newest SmartSDR.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9148 Posts
  • 3466 Reply Likes
As Burch noted, this is a defect that has been previously reported and is in our bug tracker slated for resolution.