Two Minor Bugs

  • 2
  • Problem
  • Updated 5 years ago
  • Acknowledged
I'm using ver 1.4.3.

(1) at times when switching from SSB to CW the VOX remains engaged and can interrupt receive by triggering MOX if room noise is captured by the microphone.

(2) While using CWskimmer with DAX IQ I noticed that the sample rate will often (but not always) revert to 48000 instead of the required 96000 when changing bands or modes.

Dave, W5UN
Photo of W5UN_Dave


  • 316 Posts
  • 30 Reply Likes

Posted 5 years ago

  • 2
Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3806 Posts
  • 1658 Reply Likes
Lack of DAX IQ persistence is a known bug that will be fixed in a future release
Photo of James Wilson

James Wilson

  • 2 Posts
  • 0 Reply Likes
My 6300 got stuck on vox when changing from CW to SSB and cannot stop it. VOX button is not turned on. Have tried exiting SSDR v 1.4.3 removing 13.8 volt power source and rebooting computer, with no success. How can I disable this VOX lockup ?

All Help is greatly appreciated

Dave Wilson
Photo of Walt - KZ1F

Walt - KZ1F

  • 3040 Posts
  • 648 Reply Likes
As Howard said, I believe it's always been that way, or perhaps started in earlier release.It's relatively easy to resolve, quickly mark the xmit slice to usb, turn off vox, then switch slice back to cw.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9408 Posts
  • 3641 Reply Likes
Official Response
#1 has been written up in our bug tracker for further investigation.

#2 is a previously reported issue and is already in the bug tracker.

Thanks for the reports.
Photo of Eric - KE5DTO

Eric - KE5DTO, Official Rep

  • 937 Posts
  • 356 Reply Likes

We fixed several problems related to VOX in v1.4.11.  Do you continue to have this problem on the latest version?