Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Transmit power slider not staying when I switch slices with different TX antennas.

Rich McCabe
Rich McCabe Member ✭✭✭
I am having an issue where its not working as I would expect. Not sure if its a bug or not.

I am switching between two slices on two different bands and when I adjust power level to max it does not stay there after moving the TX to another slice and coming back. Both slices have same issue.  Note that slice A (bottom) is on ANT2 for transmit and slice B is on ANT 1

If I put both slices on ANT 1 for TX it works fine.

Video

https://vimeo.com/242495949




Comments

  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited February 2018
    I'm starting my radio up to check what mine does

  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited February 2018
    so, you have 2 panadaptors open on diff bands?
  • Rich McCabe
    Rich McCabe Member ✭✭✭
    edited November 2017
    Yes. One slice on each panafall.
  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited February 2018
    I think I see what is happening,
    when switching make sure the transmit profile does not change,,if the profile changes then that will change trans power setting if that profile is set for that.
  • Rich McCabe
    Rich McCabe Member ✭✭✭
    edited November 2017
    I will check that out. That sounds possible.
  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited February 2018
    It still does it I think,,It must be a planned function
  • Rich McCabe
    Rich McCabe Member ✭✭✭
    edited June 2020
    Odd. I would not think it should load profiles each time.
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited November 2017
    Profile loads are triggered by radio state changes.
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited November 2017
    If you change a power level on one antenna when using a particular Transmit Profile that is linked to that antenna, then you need to save that Transmit profile, or it may not remember the change the next time you change antennas, because it loads the profile that is associated with that antenna.

    Ken - NM9P

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.