Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

TRANMIT PROBLEM - NO POWER OUT MORE THAN 2.2 WATTS

James Kennedy-WU5E
James Kennedy-WU5E Member ✭✭
edited June 2020 in SmartSDR for Windows
need Help yesterday was working DX and digital , now NO power out more than 2.2 watts on any mode. I have check the turning off and on the DAX control panel. I have rebooted the radio still no luck NO Power out. Jim WU5E

Comments

  • WX7Y
    WX7Y Member ✭✭✭✭
    edited June 2020
    did you try to reset the radio ( hold the OK Button down and hit the Power button) Radio will tell you it is reseting. 73's Bret WX7Y
  • James Kennedy-WU5E
    James Kennedy-WU5E Member ✭✭
    edited June 2020
    Did the reset, no luck still only 2.2 watts
  • James Kennedy-WU5E
    James Kennedy-WU5E Member ✭✭
    edited June 2020
    with 2.2 watts into my amp I get 15.6 watt out **** I'm still QRP
  • James Kennedy-WU5E
    James Kennedy-WU5E Member ✭✭
    edited June 2020
    found the issue case closed
  • DonS
    DonS Member ✭✭✭
    edited January 2020
    What was the solution?
  • James Kennedy-WU5E
    James Kennedy-WU5E Member ✭✭
    edited June 2020
    Don it was a failure of my Wave Node Watt meter I had be using for 5 years. Mostly running high power though it. I 'm going to get another sensor and try it again.
  • DonS
    DonS Member ✭✭✭
    edited January 2020
    Don't you just hate it when that happens!

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.