TRANMIT PROBLEM - NO POWER OUT MORE THAN 2.2 WATTS

  • 1
  • Problem
  • Updated 4 years ago
  • Not a Problem
need Help yesterday was working DX and digital , now NO power out more than 2.2 watts on any mode. I have check the turning off and on the DAX control panel. I have rebooted the radio still no luck NO Power out. Jim WU5E
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 295 Posts
  • 31 Reply Likes

Posted 4 years ago

  • 1
Photo of WX7Y

WX7Y

  • 497 Posts
  • 93 Reply Likes
did you try to reset the radio ( hold the OK Button down and hit the Power button) Radio will tell you it is reseting.

73's
Bret
WX7Y
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 295 Posts
  • 31 Reply Likes
Did the reset, no luck still only 2.2 watts
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 295 Posts
  • 31 Reply Likes
with 2.2 watts into my amp I get 15.6 watt out Hell I'm still QRP
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 295 Posts
  • 31 Reply Likes
found the issue case closed
Photo of Don - kx9q

Don - kx9q

  • 388 Posts
  • 16 Reply Likes
What was the solution?
Photo of James Kennedy-WU5E

James Kennedy-WU5E

  • 295 Posts
  • 31 Reply Likes
Don it was a failure of my Wave Node Watt meter I had be using for 5 years. Mostly running high power though it. I 'm going to get another sensor and try it again.
Photo of Don - kx9q

Don - kx9q

  • 388 Posts
  • 16 Reply Likes
Don't you just hate it when that happens!

This conversation is no longer open for comments or replies.