Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

There are currently no radios available Flex 6400

Rui
Rui Member
edited January 2020 in FLEX-6000 Signature Series
-Pc Desktop - No Wifi Only Ethernet
Desktop using ethernet port --> router
Router Wireless
Any help? Thanks

Answers

  • Ted  VE3TRQ
    Ted VE3TRQ Member ✭✭✭
    edited December 2019
    A bit thin on information. Information you need to provide in order to get help: - How is your PC connected (you did answer that one - wired to the router) - How is your radio connected? To what? - You say no WiFi, yet say your router is wireless. - How have you configured your radio? - What type of router are you using? What software does it run? How is it connected to the world and to your network? Please give us a way to help you.
  • Jim  KJ7S
    Jim KJ7S Member ✭✭
    edited January 2020
    Make sure you have a known to be good Ethernet cable, run it direct from radio to the computer, preferably after you make sure the drivers for your  Ethernet on the computer are up to date. When you get it going there, then try running same Ethernet cable from radio to the router, if it won't work to there, there are some parameters in the router needing some work. Just a starter.
  • Steven WA8Y
    Steven WA8Y Member ✭✭
    edited April 2019
    The Maestro has trouble if there are too many wifi signals, it was recommended I use 5GHz if available. Try moving the Maestro a bit to improve wifi reception.
  • KF4HR
    KF4HR Member ✭✭
    edited April 2019
    Rui - It sounds like what you might need is an Ethernet Switch, for example a Netgear GS108.  Plug your incoming Ethernet Cable, and your PC, and your 6400 into the Switch to share your Ethernet connection.  

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.