http://k9dur.rnaconsultingservices.com/smartsdr_utilities.html
His latest is a SDR Plotter for the 6000 Series which turns your Flex 6000 into a SWR Plotter that will automatically sweep your antenna and plot the results for you.
He also has created several other useful utilities like a Memory Management System and a Voice Keyer for the 6000 series
For those of you who want to be able to start and stop all your programs with the single touch of a button there an App Control Panel. He also has a number of other useful utilities such as an RF Safety Calculator for FCC Compliance
Check them out at
http://k9dur.rnaconsultingservices.com/misc_utilities.html
KY6LA - Howard, Elmer
- 3790 Posts
- 1640 Reply Likes
- excited
Posted 5 years ago
- 1787 Posts
- 550 Reply Likes
- 4239 Posts
- 1352 Reply Likes
Thanks, Stu!
and thanks, Howard for the link.
Ken - NM9P
- 455 Posts
- 91 Reply Likes
Great work Ray...
Pat
- 726 Posts
- 56 Reply Likes
I have a AT-Auto, and it was neat to watch the progression across the band.
And to Pat in the message above, That's what I had running while I tested my 80 meter dipole..
The swr path just barely above the baseline.
Plus the save feature....should make it easy to spot a problem developing if you compare plots.
Neat concept Ray...again...big thanks.
- 10 Posts
- 0 Reply Likes
The install instructions mention a LAN and my computer, a Windows 7 64 bit, is connected directly to the 6300 by Ethernet with no switch or router.
Has anyone else had this issue? Or have any ideas. I wrote to Ray a few days ago but have not heard anything. It looks like a very useful program. A friend of mine has used it with great success, but he is on a LAN.
Thanks.
KY6LA - Howard, Elmer
- 3790 Posts
- 1640 Reply Likes
With networked devices such as the 6000 series, while Direct Connect may sometimes work, ---from all the issues I have seen posted here about direct connect.....I have concluded that life tends to be much easier and connections tend to be much more reliable when you use routers and switches and fixed IP addresses..
Ray Andrews, K9DUR, Elmer
- 253 Posts
- 65 Reply Likes
Howard,
I agree. I just tested SWRPlotter6k on my system with the radio connected directly to the computer & the connection was unreliable at best. I know that when I first got my 6700 I had it connected direct & had issues. Tim was able to help me sort it out until I was able to get a router.
73, Ray, K9DUR
KY6LA - Howard, Elmer
- 3790 Posts
- 1640 Reply Likes
- 418 Posts
- 56 Reply Likes
Does the voice keyer work with smart sdr ? I saw it mentioned power sdr.
- 455 Posts
- 91 Reply Likes
Pat
KY6LA - Howard, Elmer
- 3790 Posts
- 1640 Reply Likes
Ray Andrews, K9DUR, Elmer
- 253 Posts
- 65 Reply Likes
Dale, Yes VoiceKeyer will work with SmartSDR. In fact, it will even work with a traditional radio with a hardware interface.
Looks like I need to re-visit the documentation & bring it up to date.
73, Ray, K9DUR
- 418 Posts
- 56 Reply Likes
Ray Andrews, K9DUR, Elmer
- 253 Posts
- 65 Reply Likes
Howard & Pat -- SWRPlotter6k is designed to restore the last mode & frequency after it does a scan.
73, Ray, K9DUR
- 170 Posts
- 74 Reply Likes
Thanks
Tim
Alex - DH2ID, Elmer
- 983 Posts
- 181 Reply Likes
http://k9dur.info/smartsdr_utilities.html
73, Alex - DH2ID
- 170 Posts
- 74 Reply Likes
Tim
Related Categories
-
SmartSDR for Windows
- 5328 Conversations
- 1638 Followers
-
FLEX-6700 Signature Series SDR
- 3130 Conversations
- 643 Followers
-
FLEX-6500 Signature Series SDR
- 3670 Conversations
- 953 Followers
-
SmartSDR CAT
- 1002 Conversations
- 402 Followers
-
FLEX-6700R Signature Series SDR
- 890 Conversations
- 150 Followers
-
PowerSDR
- 397 Conversations
- 145 Followers
-
FLEX-5000 SDR
- 488 Conversations
- 174 Followers
-
FLEX-3000 SDR
- 436 Conversations
- 151 Followers
-
FLEX-1500 SDR
- 393 Conversations
- 139 Followers
-
FLEX-6300 Signature Series SDR
- 3028 Conversations
- 868 Followers
James Kennedy-WU5E
great app , WORKED LIKE A CHAMP!