Succesful 6000 Power On/Standby Control on the Lan Solution with WeMo

  • 5
  • Idea
  • Updated 3 months ago
Applying the open collector voltage as Steve N5AC advised then a small relay means an iOS or Android app with a Belkin "WeMo" IP switch & plug pack allows me full control to put my 6000 into "Standby or On" so the gps reference keeps running. Great solution, happy camper. Small caveat until the next release is power off twice for the command to activate the stanby state, no big deal.
Photo of James Nelson

James Nelson

  • 112 Posts
  • 12 Reply Likes

Posted 5 years ago

  • 5
Photo of Jean Drolet

Jean Drolet

  • 84 Posts
  • 8 Reply Likes
My connection for remote

(Edited)
Photo of Michael Walker

Michael Walker, Technologist

  • 673 Posts
  • 197 Reply Likes


Nice job!!


This is another option as well for $9 US.  Weird that it is $42 in Canada.

https://www.amazon.com/Enclosed-AC-Protection-Bounce-Terminals/dp/B017743I7S/ref=sr_1_12?ie=UTF8&...

You can plug this into your Wemo.  I was using iHome for a remote switch, but they keep going offline and they keep telling me to just unplug it and replug it to fix it.  Pretty heard to do on a remote base.

Mike
Photo of Justin - KL2D

Justin - KL2D

  • 110 Posts
  • 42 Reply Likes
This is what I am using, with the Lowe's Iris home automation system to provide the 120V switching, which activates the DLI. I like Lowe's Iris because it is easy to use and set up, and it will fail over to Cellular data so if there is a problem I can still power down the shack, cycle the LAN power, etc. 
Photo of Bob Drake

Bob Drake

  • 2 Posts
  • 0 Reply Likes
Mike, I want to set up my Flex 6500 for remote on and off. I saw your comment about using the digital loggers Bounce terminals. I already have the Digital Loggers Pro Wi-Fi Switch. It’s a Wi-Fi surge protector that can ping a device, but I don’t know how you would use that function for. I am not an engineer. Can I just buy the bounce terminal and use it with my Pro Switch. If so, how do you wire it to the flex. Any help would be appreciated.
Bob AF7EL
Photo of K7LER

K7LER

  • 10 Posts
  • 0 Reply Likes
New 6600 owner.   After going through this thread, I decided on the following, since I'm already on the Wemo platform with other plugs:

1. The Digital Loggers.com relay - Enclosed AC/DC Power Relay with Protection & De-Bounce. Screw Terminals. 120V Trigger Input.
2. Wemo Mini Smart Plug
3. 6-ft RCA Male Shielded Audio Cable to Bare Wire - Heavy Duty.

I connected the black wire of the cable to the common.  Then the white cable to the always on.   

After flipping the remote power option in the Flex software, when I turn the wemo on, the relay does its thing and the radio comes on.  Turn the wemo off and the radio shuts down.

Works nicely and was about $50 and only required a philips screwdriver.
Photo of Michael Walker

Michael Walker, Employee

  • 665 Posts
  • 194 Reply Likes
Hi 

That is a pretty good solution!  I had problems with both the Wemo and the iHome series where they would not show up offline when I was away from home at times.  That would be the exact time I need it of course.

The iHomes were the worst for me for dropping offline and the Wemo could not stay connected to my Wifi network.  I ended up tossing a bunch into electronic trash.  

I hope you find it more stable.  

For your RCA cable, no need for the heavy duty one as it draws almost no current.  Any stereo cable will work as well.

Mike va3mw
Photo of Matt - KD5FGE

Matt - KD5FGE, Employee

  • 128 Posts
  • 67 Reply Likes
Hey Flexers,

I wanted to let you all know that we are working toward offering a packaged solution similar to what K7LER commented on a few months ago. In the mean time I wanted to provide some more detailed information on the solution as it is so simple that we are going to be promoting it as the recommended solution.

The solution Consists of:
1. Smart Outlet - For this we have chosen the TPLink Kasa Smart Outlet
https://www.amazon.com/TP-Link-Occupies-HS105-Wall-Light-Electronic-Component-switches/dp/B01K1JVZOE...
2. AC powered relay - Digital Logger Relay
https://www.amazon.com/Enclosed-AC-Protection-Bounce-Terminals/dp/B017743I7S/ref=sr_1_cc_1?s=aps&...
3. RCA cable


Instructions:

Use the Kasa iPhone or Android App to set up the outlet.

https://itunes.apple.com/us/app/kasa-smart/id1034035493?mt=8

https://play.google.com/store/apps/details?id=com.tplink.kasa_android&hl=en_US

Wire the RCA cable to the Digital Logger using the Common and Open terminals.

Plug the RCA into the "Remote-On" input on the back of the radio

Enable "Remote On" in SmartSDR

Boom! You're done!

Enjoy,

Matt Youngblood
KD5FGE



Photo of Craig Williams

Craig Williams

  • 147 Posts
  • 41 Reply Likes
Nice, clean, answer. Just ordered a set.
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4148 Posts
  • 1325 Reply Likes
I have used the Digital Loggers relay for three years with a Ankuoo NEO WiFi switch. Works like a charm. I will be replacing the NEO with a four-bay WiFi switch so I can also reset my power supply and computer and control an antenna switch as well.

Glad that Flex is putting a recommended package together. It will simplify things for a lot of people.

Ken- NM9P
(Edited)
Photo of Lance Rasmussen

Lance Rasmussen

  • 8 Posts
  • 12 Reply Likes
I had, since my original post, upgraded my Wemo outlet to a Kasa 6 outlet control strip. Each plug on the strip can be powered up remotely. O use the RCA and relay still, which allows the remote of the Flex. I have a Cirro loop, that I have the tuner going to the second plug. I have a couple other Shack items going to the strip. So now, when I'm traveling, I can flip on the items remotely, then do a Smartconnect session doing FT8 and then power down the shack. Works great.