Startup request

  • 2
  • Idea
  • Updated 5 years ago
When starting SmartSDR, I am required to select a radio by a mouse click. Would it be possible to eliminate the click so that SmartSDR brings up the radio when the task is started....no click.

By doing this, I can Remote my 6700 now. I have sucessfully operated remotely using a couple of different techniques; but, if I get a power burp and either the radio or computer goes down, I can't select the radio to restart....can't force a mouse click.
Photo of K2CM

K2CM

  • 265 Posts
  • 18 Reply Likes

Posted 5 years ago

  • 2
Photo of Steve K9ZW

Steve K9ZW, Elmer

  • 1553 Posts
  • 768 Reply Likes

If I could add to this, I'd appreciate if the last selected radio would be auto-selected after n-seconds.  "n" could be a configurable number or if hard is needed say 6 or 10 seconds as a suggestion.

If not to difficult to configure perhaps the auto-select itself could be selected/de-selected as a configuration option?

73


Steve

K9ZW

http://k9zw.wordpress.com


Photo of KY6LA - Howard

KY6LA - Howard, Elmer

  • 3762 Posts
  • 1621 Reply Likes
Or maybe a command line interface so u don't need a mouse click.
Photo of Robert -- N5IKD

Robert -- N5IKD, Elmer

  • 488 Posts
  • 152 Reply Likes
I can see it now, I could have all of my shortcuts lined up and could dive right into my regular routines.

SmartSDR -radio Sparky -freq 14050 -mode cw

SmartSDR -radio Sparky -freq 7250 -mode lsb -mic balanced

SmartSDR - radio Sparty -freq 14076 -mode digu -DAX1