SSDR V 1.8.3 Update Problem

  • 1
  • Problem
  • Updated 3 years ago
  • Solved

I have a Flex 6300 and have been running SSDR 1.6.21 successfully for many months, and am able to drive my amp to full power.  I decided to upgrade to SSDR 1.8.3., which went successfully, but now when I use the amp, I get a short burst of full power and then it drops back to almost zero.  In TUNE mode it will drive to almost full power, but as soon as I stop tuning and try to operate, it drops back to a very small power.  If I don't use the amp, the 6300 seems to put out power normally, but only 75 watts max.  The input SWR on the amp is low, but I used the autotuner to make sure.

I subsequently dropped back to SSDR 1.6.21 and everything returned to normal, with full power out of the amp getting about 85 watts max from the 6300.  I notice that there was a "fix" which relates to cutting back power on adverse SWR, and I'm wondering if this is causing my problem.  I'd like to be able to upgrade.

Anyone else seeing this?

Paul - AA6Z


Photo of Paul Burton

Paul Burton

  • 101 Posts
  • 14 Reply Likes

Posted 3 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9153 Posts
  • 3497 Reply Likes
Official Response
This issue has been resolved in SmartSDR v1.8.4