SSDR 2.1.3 Problems...

  • 1
  • Problem
  • Updated 2 years ago
Since upgrading to SSDR 2.1 I have had my radio (6500) twice hang hard in the middle of a transmission. Only a long push on the power button brings it back.  This never happened  to me using 2.0 nor one of the latest 1.x s/w. Anyone else seeing this?

/Lasse SM5GLC
Photo of Lasse Moell

Lasse Moell

  • 183 Posts
  • 32 Reply Likes

Posted 2 years ago

  • 1
Photo of Chris


  • 1 Post
  • 0 Reply Likes
Yesterday one time and today until now one time my 6k5 stopped receiving and shutted down.
I only had to restart SmartSDR.

73 Chris DK1QG
Photo of Mark - W3II

Mark - W3II

  • 260 Posts
  • 55 Reply Likes

If  you have not yet. Perform a factory reset on your radio. Make sure you Export your profiles before performing reset. Factory reset info can be found using the link below.

Once reset, Import your saved Profile settings.


Photo of Mark - WS7M

Mark - WS7M

  • 1458 Posts
  • 549 Reply Likes
If we are talking in a transmission I would also suspect some RFI.  Until I changed antenna setup I could kill my computer with enough transmissions.   Now the problem is gone with some better RFI isolation.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9478 Posts
  • 3666 Reply Likes
Also, as per the release notes, a cold boot of the radio is recommended (power down the radio, remove power for 10-15 seconds, restore power, reboot the radio).
Photo of Ross - K9COX

Ross - K9COX

  • 356 Posts
  • 108 Reply Likes
A cold reboot in life can really fix most things. My favorite saying while in IT was turn it off, turn it on ( I mean really turn it off). Next is return to factory settings. Last was look in the mirror.