SSDR 1.6 TNF Select

  • 1
  • Problem
  • Updated 4 years ago
Using new v1.6 on my 6300 the +TNF select button on the slice popouts only stay selected as long as the mouse pointer stays on it. TNF at the bottom of the screen operates normally.
Photo of Robert AA6UP

Robert AA6UP

  • 33 Posts
  • 1 Reply Like

Posted 4 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9198 Posts
  • 3558 Reply Likes
The +TNF button is for adding TNF filters to a panadapter.  It never stays on once it is clicked, it just adds more TNF filters if you keep clicking it.
Photo of Norm - W7CK

Norm - W7CK

  • 759 Posts
  • 164 Reply Likes
The first time I noticed that, I had already added a dozen or so!  Then when I tried to delete, I didn't think anything was happening at first.  After deleting all 12 or so, they were all finally gone!  It wasn't real evident that there were several all on top of each other.  Funny!
Photo of Ken - NM9P

Ken - NM9P

  • 4239 Posts
  • 1351 Reply Likes
That happened to me too when TNF was first released. Then when I tried to clear the notch, I couldn't understand why it was still there. Then I discovered that I had to remove each one I had added individually. That means clearing a dozen that were stacked on top of each other!

I still often have a senior moment, slip and double-click the button and put two on by accident.