Software Users Guide Ver 3.0.24 w-Bookmarks

  • 4
  • Idea
  • Updated 2 months ago
Here is the current software users guide for 3.0.24 with bookmarks


Download from the google site at

https://drive.google.com/file/d/1pO3jHh7TBlGoQHhyajTbeZ7uK2Dn07iZ/view?usp=sharing
Photo of Ray - K6LJ

Ray - K6LJ

  • 88 Posts
  • 25 Reply Likes

Posted 2 months ago

  • 4
Photo of Larry: KE2YC

Larry: KE2YC

  • 75 Posts
  • 6 Reply Likes
Ray,
Thank you for the tabs.
Great job,

Larry ke2yc
Photo of Robert Lonn

Robert Lonn

  • 364 Posts
  • 119 Reply Likes
This reads version.24 not .19!!! Has Flex released new software????
Photo of KENT HUFFORD

KENT HUFFORD

  • 88 Posts
  • 16 Reply Likes
There is even release notes for version .24!!

Where is the software?
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3799 Posts
  • 918 Reply Likes
Release notes are always published before the software release when possible.
Photo of Logan, KE7AZ

Logan, KE7AZ

  • 37 Posts
  • 17 Reply Likes
Thanks for the work on this.  Now, if we could only get change bars and/or change pages so that we can find the differences easily.....

Logan, KZ6O
Photo of John - WA7UAR

John - WA7UAR

  • 141 Posts
  • 35 Reply Likes
I agree. Change bars... or anything visually stylistic that shows when a particular function/feature/fix was introduced in 3.x.y would be very helpful.
Photo of Cal Spreitzer

Cal Spreitzer

  • 440 Posts
  • 112 Reply Likes
Thanks Ray!   Great work!

Cal/N3CAL
Photo of Tim N9PUZ

Tim N9PUZ

  • 24 Posts
  • 13 Reply Likes
Great item! Thank you.

Tim N9PUZ
Photo of Dave - W6OVP

Dave - W6OVP

  • 306 Posts
  • 96 Reply Likes
Starting with the next manual update I would like to see it accompanied by a simple list of WHICH pages to PRINT and CHANGE OUT containing changes from this initial version 3.

That would avoid having to reprint the entire manual again just to keep it current when only a handful of pages are affected. TNX.
(Edited)
Photo of Clay N9IO

Clay N9IO

  • 600 Posts
  • 160 Reply Likes
Thanks Ray, love clickable tabs!