SO2R behavior of the ~ button (muting and unmuting the unfocused RX) no green light

  • 1
  • Question
  • Updated 3 months ago
  • Answered
It seems that when doing SO2R, all of the normal OTRSP operations work as expected with N1MM+ Logger, except for the ~ key. Pressing the key correctly toggles the audio of the unfocused RX, but it is not toggling the green light in the unfocused entry window of N1MM+ Logger as it is supposed to. 

I'm curious if others have seen this behavior.  I am comparing the behavior of the 6600 + SmartSDR to the behavior I had experienced previously with the YCCC SO2R box. 

Since it seemingly works correctly using the YCCC Box, I'm inclined to think this may be a bug in the Flex software.  Any tips or insights would be much appreciated. 

73, 
Matt NQ6N
Photo of Matt NQ6N

Matt NQ6N

  • 79 Posts
  • 20 Reply Likes

Posted 4 months ago

  • 1
Photo of Kari Gustafsson SM0HRP

Kari Gustafsson SM0HRP, Elmer

  • 178 Posts
  • 11 Reply Likes
I think you are right. I use now and then N1MM IN SO2R with a remote 6700. But should it not be this way as tilde key only toggles stereo mode and not receiving/entry focus?
(Edited)
Photo of Matt NQ6N

Matt NQ6N

  • 79 Posts
  • 20 Reply Likes
I posted the issue on the N1MM reflector and indeed you are correct. The intended meaning of the green dot is simply to indicate which entry window is active.