Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

SmartSDR Crashes when I try to use RIT when running SoDiRa DRM Program

Ken - NM9P
Ken - NM9P Member ✭✭✭
edited June 2020 in SmartSDR for Windows
While tuning stations with SoDiRa running through DAX, if I hit the AUX1 button and try to fine tune with RIT, the SmartSDR crashes the moment I try it. I have replicated it several times after a total Cold Boot Factory reset. I am running a 6500 with SSDR 1.0.24 and the CAT and DAX programs that came with it. Have FlexControl Knob installed on port 31 Running Windows 8.1 on a Lenovo Ideacentre K410 with 6 GB RAM, i3 processor and dual monitors - one 22" HDMI, and a 23" through the VGA port. I wonder what is causing this? BTW, Once I figured it out, If I don't try to use RIT, the program works well, decoding DRM and also AM & FM signals. The readability of the AM detector is actually better than the one in the 6500, which has a very low audio. (I get more readable audio on the 6500's own detector after carefully adjusting the gain and AGC with the AGC turned OFF.)

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Ken, Is this happening on the FlexControl that is malfunctioning?
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    Yes, but before it broke. And only when using that program. RIT worked ok otherwise.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.