SmartSDR Crashes when I try to use RIT when running SoDiRa DRM Program

  • 1
  • Problem
  • Updated 5 years ago
While tuning stations with SoDiRa running through DAX, if I hit the AUX1 button and try to fine tune with RIT, the SmartSDR crashes the moment I try it.
I have replicated it several times after a total Cold Boot Factory reset.

I am running a 6500 with SSDR 1.0.24
and the CAT and DAX programs that came with it.
Have FlexControl Knob installed on port 31
Running Windows 8.1 on a Lenovo Ideacentre K410 with 6 GB RAM, i3 processor and dual monitors - one 22" HDMI, and a 23" through the VGA port.

I wonder what is causing this?

BTW, Once I figured it out, If I don't try to use RIT, the program works well, decoding DRM and also AM & FM signals. The readability of the AM detector is actually better than the one in the 6500, which has a very low audio. (I get more readable audio on the 6500's own detector after carefully adjusting the gain and AGC with the AGC turned OFF.)
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4025 Posts
  • 1248 Reply Likes

Posted 5 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
Ken,

Is this happening on the FlexControl that is malfunctioning?
Photo of Ken - NM9P

Ken - NM9P, Elmer

  • 4025 Posts
  • 1248 Reply Likes
Yes, but before it broke. And only when using that program. RIT worked ok otherwise.