SmartSDR bug in "Radio Setup"

  • 1
  • Problem
  • Updated 6 years ago
  • Acknowledged
While looking for a way to clear out the existing callsign/name via the api (from another thread), I came across a crazy bug.

With SmartSDR running:

1) Click on the General tab
2) Enable "Nickname" as the active display.
3) Enter something into the Nickname field and hit "tab" (I see it send "radio name blah" to the radio)

4) Now, click on the "GPS" tab.
5) Click on the "Transmit" tab.
6) Click on the "CW" tab.

While monitoring network traffic, after I clicked on the "CW" tab, I see it send "radio name" to the radio (with no value after it), and the radio responds with the current value that I set earlier.  If I click back on the General tab, the name field is empty.

Nothing major, but ya never know if it points to a larger bug somewhere. :)


Robbie - KI4TTZ
Photo of Robbie - KI4TTZ

Robbie - KI4TTZ

  • 484 Posts
  • 78 Reply Likes

Posted 6 years ago

  • 1
Photo of Robbie - KI4TTZ

Robbie - KI4TTZ

  • 484 Posts
  • 78 Reply Likes
btw, same thing happens if I reverse steps 4-5-6.  I'm able to reproduce it every time.


Photo of Steve - N5AC

Steve - N5AC, VP Engineering / CTO

  • 1057 Posts
  • 1100 Reply Likes
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9204 Posts
  • 3568 Reply Likes
Thanks for the detailed report Robbie so we can reproduce the issue which is paramount in the ability to fix it.
Photo of Eric - KE5DTO

Eric - KE5DTO, Official Rep

  • 919 Posts
  • 346 Reply Likes
This is fixed in the latest internal version and will be included in the next release.  Thanks for reporting.

This conversation is no longer open for comments or replies.