SmartSDR TCP/IP API - "xmit" command - unexpected behaviour

  • 1
  • Problem
  • Updated 2 years ago
  • Acknowledged
Hello,

during a test on my voice keyer I found the following (I suppose) problem: I sent a "xmit on" command while the radio was turned on, but no client was connected (SSDR off).
This caused and immediate transmit (MOX button enabled) as soon as I started SSDR.
Probably commands like "xmit" should be rejected by the radio when no client is connected.

Can you confirm this is the right beaviour? (My rig is a 6300)

73' Enzo
iw7dmh


 
Photo of IW7DMH, Enzo

IW7DMH, Enzo

  • 353 Posts
  • 84 Reply Likes

Posted 2 years ago

  • 1
Photo of Eric - KE5DTO

Eric - KE5DTO, Employee

  • 673 Posts
  • 203 Reply Likes
Official Response
This is indeed a bug as I just confirmed the behavior.  I have entered it as  issue #2990 in our tracking system.  Thanks for reporting this.