Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

SmartSDR Software Supported CAT Commands Radio Station Automation and Control

Ali  9K2WA
Ali 9K2WA Member ✭✭
edited April 2017 in SmartSDR for Windows
I started this project when FRS released the new SSDR CAT software supporting the CAT commands end of 2016.

I did not have to use the FTDI cables, instead I am using two TCP/IP ports one for slice A and another for Slice B.

Programming in C# is beyond my humble programming capabilities, but the control processor I am using for many years can be programmed in C# and probably can work with the FlexLib.

The aim of the project is to control all equipment, switches (lights, A/C and your coffee machine), provides PTZ IP cams streams for the shack and the antennas cams and use weather data specially wind direction to turn antennas in favorable direction when shutting down ...etc.  Also it will use the radio band data to automatically switch antennas and operate with no unexpected problems.

The GUI can run on a Windows PC or Tablet, MAC, iPhone/iPad and Android.  Local or remote.

I have made a short YouTube video demonstrating some functions that have been completed so far, mainly my Flex radios and some other screens, I really did not need all CAT commands, but it was not very difficult to program.  there will be a lot to be done with other serial protocols for rotors control and rely switching logic.

You can find the video at : https://youtu.be/48yg9UG0e3M

Thanks FRS for the CAT commands support.

Comments

  • GI4FZD
    GI4FZD Member
    edited April 2017
    Nice work, look forward to seeing the finished version.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.