SmartSDR iOS problems

  • 1
  • Problem
  • Updated 4 months ago
  • (Edited)
Installed latest Smart SDR update and now iPAD or iPhone cannot operate anymore. No problem with Maestro or desktop SSDR.

I am not sure how to describe the problem with iOS, but will try:
1. When start smart sdr on iPAD, it starts wit bandwith from 0 to 14mhz on the screen. I clcik "BW" and change it to 100kHz
2. Audio (Speaker icon is OFF) - I turn it ON and can hear band noise
3. Change Band to 80m - "Bands" -> "80"
4, Screen show me again BW from 0 to 14Mhz and slice located exactly at 14mHz
5. Click "Bands"->160m, Speaker is OFF again
6. Change Band to 80m - "Bands" -> "80"
7. Screen show me again BW from 0 to 14Mhz and there is no active slice.
8. Created slice A, all BW again 0-14mhz
Going circles with no solution.

In short it is completely broken both on iphone and iPad.
How can I revert to a previous version?
Thanks
Sergey, KN7K
Photo of Sergey Abrikosov

Sergey Abrikosov

  • 240 Posts
  • 29 Reply Likes

Posted 4 months ago

  • 1
Photo of Winston VK7WH

Winston VK7WH

  • 308 Posts
  • 71 Reply Likes
Sergey, my iPad and iPhone are working fine.


Has your iPad and iPhone installed the latest SMARTSDR for iOS update? I suggest to contact Marcus. His contact details are on the app setup page. Marcus is very responsive.


Good luck


Winston
(Edited)
Photo of Sergey Abrikosov

Sergey Abrikosov

  • 240 Posts
  • 29 Reply Likes
Thank you Winston,
I will contact Marcus since it seems like issue with my setup.
Sergey, KN7K